100% Accurate Answers! Apr-2024 1z0-996-22 Actual Real Exam Questions
Best Value Available! 2024 Realistic Verified Free 1z0-996-22 Exam Questions
NEW QUESTION # 17
Which statement correctly describes the relation between a device and a measuring component?
- A. A device can have any combination of interval and/or scalar measuring components.
- B. A device should have only one measuring component type.
- C. A device configuration links a device only to interval channels.
- D. Two measuring components on the same device should have the same Units of Measure (UOM).
Answer: A
NEW QUESTION # 18
What can cause multiple bill lines for a rate component to be produced in a bill calculation header?
- A. change in Bill Factor
- B. change in Rate Version Calculation Group
- C. changes in Rate Version Calculation Group and Bill Factor
- D. changes in Rate Schedule and Bill Factor
- E. change in Rate Schedule
Answer: A
Explanation:
A bill factor is a value that is used to group bill lines for a rate component within a bill calculation header1. A bill factor can be derived from various sources, such as the usage subscription, the service agreement, the service point, the device, the measuring component, the rate schedule, the rate component, or a custom algorithm2. If the bill factor changes during the bill calculation period, the system will produce multiple bill lines for the same rate component, each with a different bill factor value1. Therefore, the correct answer is C.
change in Bill Factor. References:
About Bill Factors
Configuring Bill Factors
NEW QUESTION # 19
There has been a meter exchange at a service point in the past year.
How many installation events exist for the service point for the past year?
- A. One
- B. Four
- C. Two
- D. Three
- E. None
Answer: C
Explanation:
Whenever a device is installed or removed at a service point, an installation event is created. Installation events capture the history of the devices that have been installed at a service point and link a specific device configuration to the service point. There are different types of installation events for different types of devices, such as smart meters, manual meters, items, and communication components. In this case, since there has been a meter exchange at a service point in the past year, there must be two installation events: one for the removal of the old meter and one for the installation of the new meter. Both installation events will have the same service point ID, but different device configuration IDs and dates/times. References: About Install Events, Maintaining Install Events
NEW QUESTION # 20
Your client has installed scalar devices to measure the solar energy generated (Export) and the energy received (Import) from the National Grid. This data is stored in separate measuring components (registers).
The validation rules are generally the same for both measuring components, but there is one exception. The Negative Consumption check applies only toenergy received (import).
Which two are possible configurations resulting in the Negative Consumption rule being checked for energy received (import) only? (Choose two.)
- A. Use Eligibility Criteria.
- B. Modify the base VEE rule.
- C. Remove the Negative Consumption check from the VEE group.
- D. Use the Skip Flag in the VEE rule.
- E. Create two different VEE groups.
Answer: A,E
Explanation:
To apply different validation rules to different measuring components, you can either create two different VEE groups and assign them to the respective measuring components, or use eligibility criteria to specify the conditions under which a VEE rule should be applied or skipped. Both of these options allow you to check the Negative Consumption rule for energy received (import) only, while applying the other validation rules to both measuring components. References:
Oracle Utilities Customer Cloud Service Business User Guide, Chapter 5: Metering, Section 5.3:
Validating Meter Data
Oracle Utilities Customer Cloud Service Administrative User Guide, Chapter 6: Configuring Metering, Section 6.2: Configuring Validation, Estimation, and Editing (VEE)
NEW QUESTION # 21
How should you configure the derived values that are relevant for a device?
- A. Configure the derived values on the Final Measurement Type for the measuring components to be defined on the device.
- B. Configure the derived values on the Measuring Component for the measuring components to be defined on the device.
- C. Configure the derived values on the Measuring Component Type for the measuring components to be defined on the device.
- D. Configure the derived values on the Device Type for the derived values to be defined on the device.
Answer: A
NEW QUESTION # 22
Which option correctly describes the high-level process from loading measurements through calculating usage?
- A. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Calculate Usage - B. 1. Load Initial Measurements
2. Validate, evaluate, and estimate Initial Measurements
3. Update Initial Measurements
4. Calculate Usage - C. 1. Load Initial Measurements
2. Validate, edit, and estimate Initial Measurements
3. Create Final Measurements
4. Update Initial Measurements - D. 1. Load Initial Measurements
2. Verify, evaluate, and enter Initial Measurements
3. Create Final Measurements
4. Calculate Usage
Answer: A
Explanation:
The high-level process from loading measurements through calculating usage is as follows1:
Load Initial Measurements: This step involves loading the raw measurement data from the head-end systems or other sources into the Initial Measurement Data (IMD) table. The IMD can be of scalar or interval type, and can have different statuses, such as new, processed, or rejected2.
Validate, edit, and estimate Initial Measurements: This step involves applying the Validation, Estimation, and Editing (VEE) rules to the IMD to check for data quality, completeness, and accuracy. The VEE rules can perform various actions, such as validating the IMD against predefined criteria, editing the IMD values based on business logic, estimating the missing or invalid IMD values based on historical or statistical methods, or generating exceptions for the IMD that require manual intervention3.
Create Final Measurements: This step involves creating the Final Measurement Data (FMD) from the IMD that have passed the VEE rules. The FMD are the processed and validated measurement data that are used for further processing, such as usage calculation, billing, reporting, or analysis. The FMD can also have derived values that are calculated from the FMD values using derivation formulas.
Calculate Usage: This step involves calculating the usage transactions from the FMD using the usage calculation rules. The usage calculation rules define how to calculate the service quantity and price for a usage transaction based on the usage subscription, the rate schedule, the measuring components, and other parameters. The usage transactions are the output of the usage calculation process that are used for billing or other purposes. References:
1: Overview of Usage Calculation
2: About Initial Measurements
3: About Validation, Estimation, and Editing
4: About Final Measurements
5: About Usage Transactions
NEW QUESTION # 23
Which three statements are true about usage subscriptions? (Choose three.)
- A. A usage subscription can have many service points.
- B. Usage subscriptions are always related to an account.
- C. A usage subscription can be configured to include only a portion of a service point usage.
- D. A usage subscription can have either parent or child service points.
- E. A usage subscription can have only one service point.
Answer: A,B,D
NEW QUESTION # 24
Your implementation requires an installation of two types of devices:
Electric Smart Meter
Gas Manual Meter
Which two Device Type attributes are required to identify these device types? (Choose two.)
- A. Valid Measuring Component Types
- B. Service Type
- C. Manufacturer
- D. Device Business Object
- E. Serial Number
Answer: A,B
NEW QUESTION # 25
What contains the details of how a bill was calculated and how it will be printed on a bill?
- A. Service Agreement
- B. Calculation Rules
- C. Bill Segments
- D. Bill
- E. Rate Schedule
Answer: C
NEW QUESTION # 26
Which three statements are true about the different types of measuring components? (Choose three.)
- A. The terms register and channel are synonyms for measuring component.
- B. Only physical measuring components reference a device configuration.
- C. Scalar measuring components contain a single measurement for an arbitrary period of time.
- D. Seconds-per-interval (SPI) is one of the attributes of scalar measuring components.
- E. The measuring component types are physical, standalone, scratchpad, and TOU.
Answer: A,C,E
NEW QUESTION # 27
When a service agreement is created, it is based on a template called the Service Agreement Type (SA Type) and values may be defaulted from a Start Option.
Which three attributes can get defaulted from a Start Option? (Choose three.)
- A. Terms and Conditions
- B. CIS Division
- C. Rate
- D. Service to be billed
- E. Contract Quantities
Answer: C,D,E
Explanation:
A Start Option is a configuration option that allows you to define the default values for certain attributes of a service agreement when it is created. A Start Option is linked to a Service Agreement Type (SA Type), which is a template for a service agreement that specifies its characteristics and behavior. A Start Option can default the following attributes of a service agreement:
Service to be billed: This is the service point and the measuring component that are associated with the service agreement and determine the billing and metering of the service. The service to be billed can be defaulted from the Start Option based on the service point type and the measuring component type.
Contract Quantities: These are the quantities that are agreed upon between the customer and the utility for the service agreement. They can include the contract demand, the contract capacity, the contract energy, and the contract power factor. The contract quantities can be defaulted from the Start Option based on the rate schedule and the service point type.
Rate: This is the rate schedule that defines the charges and adjustments that apply to the service agreement. The rate can be defaulted from the Start Option based on the service point type and the measuring component type.
References: Start Option - Main, Oracle Utilities Customer Cloud Service - Get Started, Service Agreement - Main
NEW QUESTION # 28
When the source of a Financial Transaction is canceled, what does it result in?
- A. The source Financial Transaction is deleted and a new reversal Financial Transaction is created.
- B. No change occurs.
- C. The source Financial Transaction status is changed to "Canceled".
- D. The source Financial Transaction is deleted.
- E. A new reversal Financial Transaction is created.
Answer: E
Explanation:
When the source of a Financial Transaction is canceled, it results in a new reversal Financial Transaction being created. The reversal Financial Transaction has the same amount as the source Financial Transaction, but with the opposite sign. The reversal Financial Transaction also has the same source as the source Financial Transaction, but with a different status. The source Financial Transaction remains in the system, but its status is changed to "Canceled". The reversal Financial Transaction is used to reverse the financial impact of the source Financial Transaction on the account balance and other financial calculations. References: Oracle Utilities Customer Cloud Service Financial Transaction - Main, Oracle Utilities Customer Cloud Service Cancel Reasons, Oracle Utilities Customer Cloud Service Setting Up Payment Cancellation Reasons
NEW QUESTION # 29
Which three statements are true in relation to Financial Transaction creation algorithms? (Choose three.)
- A. They control how the payoff balance is affected.
- B. They control if and how the General Ledger entries are created.
- C. They control how the General Ledger details are created as these must always exist against a Financial Transaction.
- D. They control how the current balance is affected.
- E. They control when a Financial Transaction is to be swept onto a bill.
Answer: A,B,E
NEW QUESTION # 30
There has been a meter exchange at a service point in the past year.
How many installation events exist for the service point for the past year?
- A. Two
- B. One
- C. Four
- D. Three
- E. None
Answer: B
NEW QUESTION # 31
What Service Order activity types does the application include?
- A. Enable Service; Disable Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Back-to-Back Service
- B. Start Service; Stop Service; Install Meter; Remove Meter; Exchange Meter; Move-In/Move-Out Service
- C. Start Service; Stop Service; Cut for Non-Payment; Reconnect Service for Payment; Exchange Meter; Move-In/Move-Out Service
- D. Enable Service; Disable Service; Install Meter; Remove Meter; Exchange Meter; Back-to-Back Service
Answer: A
NEW QUESTION # 32
You are configuring a VEE group to include rules to be executed when loading the initial measurement data (IMD).
What is the VEE group directly associated with?
- A. Measuring Component Type
- B. Device Type and Measuring Component Type
- C. Device Type
- D. Device Configuration Type
- E. Usage Type
Answer: D
NEW QUESTION # 33
What determines an Account's Balance?
- A. the sum of all the balances recorded in the "Balance Due" field on each serviceagreement related to the account
- B. the sum of all the Financial Transactions linked directly to the account
- C. the logic defined in a plug-in spot on the Installations Option
- D. the amount recorded in the "Balance Due" field on an account
- E. the sum of all the Financial Transactions linked directly to theservice agreements related to the account
Answer: B
Explanation:
An account's balance is the total amount of money that the account owes or is owed by the utility1. An account's balance is determined by the sum of all the financial transactions linked directly to the account2. Financial transactions are records of monetary events that affect an account, such as charges, payments, adjustments, or refunds3. Financial transactions can be linked to an account directly or indirectly through a service agreement. However, only the financial transactions that are linked directly to the account are used to calculate the account's balance2. Therefore, the correct answer is E. the sum of all the Financial Transactions linked directly to the account. References:
About Accounts
About Account Balances
About Financial Transactions
[Understanding Financial Transaction Linkage]
NEW QUESTION # 34
What correctly describes the possible causes of price proration?
- A. changes in Rate Version Calculation Group and Bill Factor only
- B. change in Bill Factor only
- C. change in Rate Version Calculation Group only
- D. changes in Rate Schedule and Bill Factor only
- E. change in Rate Schedule only
Answer: D
NEW QUESTION # 35
The base package usage transaction business object is represented by D2-UsageTransaction. The usage calculation engine or process drives the specifics of the usage to be calculated on this business object.
Based on this, which three configuration areas will have an impact on the usage calculation process? (Choose three.)
- A. VEE rule
- B. TOU map
- C. Usage Rule
- D. Factor Override
Answer: B,C,D
NEW QUESTION # 36
When creating a new business object for a service point (SP), what items are required to be able toview and update the new elements associated with the SP?
- A. Display UI Map, Display Map Service Script, and Maintenance UI Map
- B. Schema, Validation Algorithm, and Maintenance UI Map
- C. Maintenance Object, Application Service, and Schema
- D. Validation Algorithm, Post Processing Algorithm, and Lifecycle
Answer: A
Explanation:
When creating a new business object for a service point in Oracle Utilities Customer Cloud Service, it is necessary to have certain elements in place to view and update the new elements associated with the service point. The correct option, "C. Display UI Map, Display Map Service Script, and Maintenance UI Map", encompasses the essential components for this process.
Display UI Map: The User Interface (UI) Map is crucial for defining how the data fields of the business object are displayed in the user interface. It is essentially a layout that dictates how information is presented and interacted with within the system.
Display Map Service Script: Service Scripts are used to handle the business logic associated with a business object. In the context of a Display Map, the Service Script would be responsible for managing how data is retrieved, manipulated, and presented in the UI, based on the definitions in the UI Map.
Maintenance UI Map: Similar to the Display UI Map, the Maintenance UI Map is focused on the aspects of editing or updating the business object. This UI Map would define how the user interface should be laid out for maintenance tasks, such as updating service point details or adding new information.
These components work together to ensure that when a new business object is introduced for a service point, it can be effectively displayed, maintained, and interacted with within the Oracle Utilities Customer Cloud Service system.
References:
Oracle documentation on Defining Business Objects: Defining Business Objects.
Oracle documentation on Useful Services and Business Services: Useful Services and Business Services.
Oracle documentation on Business Objects: Business Objects.
Oracle documentation on Granting Access To Business Objects: Granting Access To Business Objects.
NEW QUESTION # 37
What happens when a device's measuring components are reconfigured (a new measuring component will be read) at a service point?
- A. The original installation event is updated with the "removal" (expire old device configuration) and a new installation event is created to "install" (new device configuration).
- B. The original installation event is updated with the "removal" (expire old device configuration).
- C. A new installation event is created to "install" (new device configuration).
- D. A device with a new configuration type is created.
- E. A device with a new configuration type is created. Moreover, a new installation event is created to 'install" (new device configuration).
Answer: A
NEW QUESTION # 38
......
Actual Questions Answers Pass With Real 1z0-996-22 Exam Dumps: https://www.practicetorrent.com/1z0-996-22-practice-exam-torrent.html
Pass Your Exam Easily! 1z0-996-22 Real Question Answers Updated: https://drive.google.com/open?id=1uvMRH1-Q4_u30SkLE3F08Zj-7_Yl5BeA