2022 Updated Verified 220-1101 Downloadable Printable Exam Dumps
The Ultimate CompTIA 220-1101 Dumps PDF Review
CompTIA 220-1101 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
NEW QUESTION 11
A user's computer is not receiving a network connection. The technician confirms that the connection seems to be down and looks for the user's port on the patch panel. The port and patch panel are not labeled. Which of the following network tools should the technician use to identify the port?
- A. Network tap
- B. Toner probe
- C. Punchdown tool
- D. Crimper
Answer: A
NEW QUESTION 12
A laptop has been returned for a screen repair. The owner insists the screen is broken, but occasionally a faded image is able to be seen in very bright settings on the desktop. Which of the following steps should the repair technician take FIRST?
- A. Recommend the usage of an external display instead.
- B. Replace the graphics card.
- C. Ensure the backlight is functioning as expected.
- D. Replace the screen, as the customer insists.
Answer: C
NEW QUESTION 13
Which of the following network devices is used to separate broadcast domains?
- A. Wireless access point
- B. Switch
- C. Router
- D. Hub
Answer: B
NEW QUESTION 14
While implementing a non-carrier-grade wireless backhaul, a technician notices the current channel selection is extremely polluted with various RF signals. Upon performing a spectral analysis, the technician discovers a channel containing almost no RF pollution. Unfortunately, the technician is unable to select that channel. Which of the following is the MOST likely reason for this issue?
- A. The channel selection is defective; contact the manufacturer.
- B. The channel is reserved for licensed band use.
- C. The device requires a firmware update to unlock the channel.
- D. The channel must be unlocked by the vendor.
Answer: C
NEW QUESTION 15
A customer reports that a computer is never able to reach more than a 100Mbps transfer data rate, even when using a Gigabit LAN card. While troubleshooting, the technician notices the network cable needs to be replaced. Which of the following cable categories is limiting the transfer speed?
- A. Cat 6
- B. Cat 5
- C. Cat 5e
- D. Cat 6a
Answer: B
NEW QUESTION 16
An online retailer would like to add capacity to support increased sales. Additional servers have been installed. Which of the following should be used to ensure each new server is being properly utilized?
- A. Round-robin DNS
- B. Virtualization
- C. Clustering
- D. Load balancer
Answer: B
NEW QUESTION 17
A colleague has a laptop that has been working as expected for several years wall outlet. The MOST likely component that needs to be replaced is the:
- A. power adapter.
- B. system fan.
- C. hard drive.
- D. battery.
Answer: D
NEW QUESTION 18
A user reboots a machine. On rebooting, the user hears one beep, and then an error message is displayed.
Which of the following are MOST likely causing this issue? (Select TWO).
- A. RAM module
- B. Power supply
- C. Boot order
- D. Graphics card
- E. CPU
- F. USB flash drive
Answer: A,C
NEW QUESTION 19
A remote user called the help desk to report a notification indicating there is limited or no connectivity. The user can access local file folders and other local machines but none of the organization's servers or network items. Web pages do not appear to function either. Which of the following is the MOST likely cause of the issue?
- A. The user's domain account is locked out.
- B. The user's IP address needs to be renewed.
- C. The user's internet connection is down.
- D. The user's switch has stopped working.
Answer: B
NEW QUESTION 20
A technician logs on to a PC and inserts an encrypted USB drive. When opening File Explorer, the technician cannot see the USB drive. Which of the following tools should the technician use to see all drives?
- A. BitLocker
- B. Diskmgml
- C. Disk Cleanup
- D. DiskPart
Answer: A
NEW QUESTION 21
An online retailer wants to save money and is considering migrating to the public cloud so peak is over. Which of the following BEST describes this aspect of cloud computing?
- A. High availability
- B. Rapid elasticity
- C. Shared resources
- D. Metered utilization
Answer: B
NEW QUESTION 22
A technician goes to a classroom to troubleshoot a projector that occasionally powers off. The technician recreates the issue and notices the projector will not power back on until approximately 15 minutes have passed. After 15 minutes of being powered on. the projector shuts off again. Which of the following should the technician perform NEXT to resolve the issue?
- A. Replace the bulb.
- B. Check the power cable connection.
- C. Adjust the standby timeout.
- D. Clean the filter.
Answer: D
NEW QUESTION 23
A user acquired a new workstation and is attempting to open multiple targe Excel files simultaneously. The user is not experiencing the expected performance when executing such large requests. Which of the following should a technician do FIRST?
- A. Upgrade the CPU in the workstation.
- B. Upgrade the power supply in the workstation.
- C. Increase the swap partition.
- D. Upgrade the RAM in the workstation.
Answer: D
NEW QUESTION 24
Which of the following describes metered utilization of cloud resources?
- A. Resources provisioned instantly
- B. Resources pooled to increase computing power
- C. Implementation of rapid elasticity
- D. Payments made only for resources that are used
Answer: D
NEW QUESTION 25
A user connects a smartphone to a laptop. Which of the following types of networks has the user created?
- A. WLAN
- B. LAN
- C. MAN
- D. PAN
Answer: D
NEW QUESTION 26
Upon booting a workstation, a technician hears a distinct clicking sound after power is applied to the motherboard. Which of the following would MOST likely be the cause?
- A. SSD
- B. HDD
- C. S.M.A.R.T
- D. RAID
Answer: B
NEW QUESTION 27
Which of the following BEST describes the main function of a web server?
- A. Providing IP addresses and printing services
- B. Hosting home pages and business portals
- C. Setting up personal mailboxes and calendars
- D. Storing files and controlling user access
Answer: B
NEW QUESTION 28
A user requested upgrades to a company-Issued laptop to increase its performance while working with a large database stored on drive C. Which of the following tasks should a systems administrator complete to BEST meet this goal? (Select TWO).
- A. Upgrade to 1GB NIC.
- B. Upgrade the power supply.
- C. Configure RAID 1.
- D. Migrate to a SSD.
- E. Increase the RAM.
- F. Install a hybrid drive.
Answer: C,E
NEW QUESTION 29
A user failed to gain access to a building's entrance after security measures at the entrance were upgraded last week. The company implemented the 13.56MHz frequency short band, and users can now utilize their mobile devices to authenticate. Which of the following has to be enabled for the mobile device to authenticate?
- A. Biometrics
- B. Bluetooth
- C. PIN
- D. NFC
Answer: D
NEW QUESTION 30
A technician installed new firmware on the company's laser printers and has since been receiving multiple calls that information is garbled and looks like code. Only printers with the new firmware are having this issue. Which of the following steps should the technician complete NEXT?
- A. Install an updated printer driver on the print server
- B. Reboot all the machines having the issues
- C. Change the language settings on the printers
- D. Reboot all the printers.
Answer: D
NEW QUESTION 31
A user submitted a support ticket that states all of the printouts from a laser printer appear to have double images imposed on them. A review of past printer support tickets shows that maintenance kit has not been installed in more than a year. Which of the following printer consumables is MOST likely causing the issue?
- A. Transfer roller
- B. Fuser
- C. Separation pad
- D. Ink cartridge
Answer: B
NEW QUESTION 32
A company has a dot matrix printer that uses carbon paper. The company reports that the first page is printing too light, although the following pages are still legible. Which of the following MOST likely needs to be fixed?
- A. The ribbon is low on ink or missing and must be replaced to get proper output
- B. The heating element has failed, and a new one needs to be installed for proper transfer
- C. The wrong type of filement is loaded, preventing it from sticking correctly
- D. The fuser assembly is not calibrated properly, causing it to impact the paper too hard
- E. The print drum is worn and loose causing the printing to be light in places
Answer: B
NEW QUESTION 33
A technician is upgrading a legacy wireless router for a home user. After installing the new router and configuring the SSID to be the same, none of the devices will connect to the network. Which of the following should the technician check NEXT?
- A. ONS servers
- B. MAC filtering list
- C. Wireless protocol settings
- D. OHCP pool configuration
Answer: B
NEW QUESTION 34
A technician powers on a PC and its monitor and sees the following error message:
No input signal detected
The display lights on the computer are on. Which of the following is a possible solution?
- A. Checking the power plug on the monitor
- B. Changing the BIOS settings
- C. Checking the power plug on the PC
- D. Changing the connector setting on the monitor
Answer: D
NEW QUESTION 35
An office manager reports that a printer is experiencing performance issues. Printouts are smudging when they are handled, and. recently, whenever the manager tries to print oversized documents, the paper jams before anything is printed on it.
Answer:
Explanation:
NEW QUESTION 36
......
Achive your Success with Latest 220-1101 Exam: https://www.practicetorrent.com/220-1101-practice-exam-torrent.html
Achieve The Utmost Performance In 220-1101 Exam Pass Guaranteed: https://drive.google.com/open?id=1n91HdV0zSqvzlzaPDfxEUPx1tvfDRM8j