Cisco 300-710 Real Exam Questions Guaranteed Updated Dump from PracticeTorrent [Q16-Q40]

Share

Cisco 300-710 Real Exam Questions Guaranteed Updated Dump from PracticeTorrent

Verified Pass 300-710 Exam in First Attempt Guaranteed


For more info read reference:

Exam Guide Exam Contents Study Materials FAQs and Guide


What Designation to Achieve Next?

After these certificates have been attained, candidates can then pursue more advanced expert-level certifications in the future such as the popular CCIE Security offered by the same vendor.

 

NEW QUESTION 16
Refer to the exhibit.

An administrator is looking at some of the reporting capabilities for Cisco Firepower and noticed this section of the Network Risk report showing a lot of SSL activity that cloud be used for evasion. Which action will mitigate this risk?

  • A. Use Cisco AMP for Endpoints to block all SSL connection
  • B. Use SSL decryption to analyze the packets.
  • C. Use encrypted traffic analytics to detect attacks
  • D. Use Cisco Tetration to track SSL connections to servers.

Answer: B

 

NEW QUESTION 17
An engineer is restoring a Cisco FTD configuration from a remote backup using the command restore remote-manager-backup location 1.1.1.1 admin /volume/home/admin BACKUP_Cisc394602314.zip on a Cisco FMG. After connecting to the repository, an error occurred that prevents the FTD device from accepting the backup file. What is the problem?

  • A. The backup file was not enabled prior to being applied
  • B. The backup file is not in .cfg format.
  • C. The backup file extension was changed from tar to zip
  • D. The backup file is too large for the Cisco FTD device

Answer: C

 

NEW QUESTION 18
An engineer has been tasked with using Cisco FMC to determine if files being sent through the network are malware. Which two configuration tasks must be performed to achieve this file lookup? (Choose two.)

  • A. The Cisco FMC needs to connect to the Cisco ThreatGrid service directly for sandboxing.
  • B. The Cisco FMC needs to include a SSL decryption policy.
  • C. The Cisco FMC needs to connect with the FireAMP Cloud.
  • D. The Cisco FMC needs to include a file inspection policy for malware lookup.
  • E. The Cisco FMC needs to connect to the Cisco AMP for Endpoints service.

Answer: A,D

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Reference_a_wrapper_Chapter_topic_here.html#ID-2193-00000296

 

NEW QUESTION 19
What are the minimum requirements to deploy a managed device inline?

  • A. passive interface, MTU, and mode
  • B. inline interfaces, MTU, and mode
  • C. inline interfaces, security zones, MTU, and mode
  • D. passive interface, security zone, MTU, and mode

Answer: B

 

NEW QUESTION 20
An engineer configures an access control rule that deploys file policy configurations to security zones or tunnel zones, and it causes the device to restart. What is the reason for the restart?

  • A. Source or destination security zones in the access control rule matches the security zones that are associated with interfaces on the target devices.
  • B. Source or destination security zones in the source tunnel zone do not match the security zones that are associated with interfaces on the target devices.
  • C. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the source policy.
  • D. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the destination policy.

Answer: A

 

NEW QUESTION 21
What is the maximum bit size that Cisco FMC supports for HTTPS certificates?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config- guide-v61/system_configuration.html

 

NEW QUESTION 22
Which protocol establishes network redundancy in a switched Firepower device deployment?

  • A. HSRP
  • B. STP
  • C. VRRP
  • D. GLBP

Answer: B

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/firepower_threat_defense_high_availability.html

 

NEW QUESTION 23
A network engineer is receiving reports of users randomly getting disconnected from their corporate applications which traverses the data center FTD appliance Network monitoring tools show that the FTD appliance utilization is peaking above 90% of total capacity. What must be done in order to further analyze this issue?

  • A. Use the Packet Export feature to save data onto external drives
  • B. Use the Packet Tracer feature for traffic policy analysis
  • C. Use the Packet Analysis feature for capturing network data
  • D. Use the Packet Capture feature to collect real-time network traffic

Answer: D

Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/212474-working-with-firepower-threat-defense-f.html

 

NEW QUESTION 24
Which limitation applies to Cisco Firepower Management Center dashboards in a multidomain environment?

  • A. Child domains cannot view dashboards that originate from an ancestor domain.
  • B. Only the administrator of the top ancestor domain can view dashboards.
  • C. Child domains have access to only a limited set of widgets from ancestor domains.
  • D. Child domains can view but not edit dashboards that originate from an ancestor domain.

Answer: A

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Using_Dashboards.html

 

NEW QUESTION 25
What is the result of specifying of QoS rule that has a rate limit that is greater than the maximum throughput of an interface?

  • A. Matching traffic is not rate limited.
  • B. The system repeatedly generates warnings.
  • C. The rate-limiting rule is disabled.
  • D. The system rate-limits all traffic.

Answer: A

 

NEW QUESTION 26
Which group within Cisco does the Threat Response team use for threat analysis and research?

  • A. Cisco Talos
  • B. OpenDNS Group
  • C. Cisco Network Response
  • D. Cisco Deep Analytics

Answer: A

 

NEW QUESTION 27
A network engineer wants to add a third-party threat feed into the Cisco FMC for enhanced threat detection Which action should be taken to accomplish this goal?

  • A. Enable Threat Intelligence Director using REST APIs
  • B. Enable Rapid Threat Containment using STIX and TAXII
  • C. Enable Threat Intelligence Director using STIX and TAXII
  • D. Enable Rapid Threat Containment using REST APIs

Answer: C

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guide-v623/cisco_threat_intelligence_director__tid_.html

 

NEW QUESTION 28
What is a result of enabling Cisco FTD clustering?

  • A. All Firepower appliances can support Cisco FTD clustering.
  • B. Site-to-site VPN functionality is limited to the master unit, and all VPN connections are dropped if the master unit fails.
  • C. Integrated Routing and Bridging is supported on the master unit.
  • D. For the dynamic routing feature, if the master unit fails, the newly elected master unit maintains all existing connections.

Answer: B

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/clustering_for_the_firepower_threat_defense.html

 

NEW QUESTION 29
Which Cisco Firepower rule action displays an HTTP warning page?

  • A. Monitor
  • B. Allow with Warning
  • C. Interactive Block
  • D. Block

Answer: C

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System-UserGuide-v5401/AC-Rules-Tuning-Overview.html#76698

 

NEW QUESTION 30
A network engineer is configuring URL Filtering on Firepower Threat Defense. Which two port requirements on the Firepower Management Center must be validated to allow communication with the cloud service? (Choose two.)

  • A. outbound port TCP/80
  • B. outbound port TCP/443
  • C. outbound port TCP/8080
  • D. inbound port TCP/443
  • E. inbound port TCP/80

Answer: A,B

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/SecurityInternet_Accessand_Communication_Ports.html

 

NEW QUESTION 31
Which two statements about bridge-group interfaces in Cisco FTD are true? (Choose two.)

  • A. Each directly connected network must be on the same subnet.
  • B. Bidirectional Forwarding Detection echo packets are allowed through the FTD when using bridge-group members.
  • C. Bridge groups are supported only in transparent firewall mode.
  • D. The BVI IP address must be in a separate subnet from the connected network.
  • E. Bridge groups are supported in both transparent and routed firewall modes.

Answer: B,C

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html

 

NEW QUESTION 32
A network engineer implements a new Cisco Firepower device on the network to take advantage of its intrusion detection functionality. There is a requirement to analyze the traffic going across the device, alert on any malicious traffic, and appear as a bump in the wire How should this be implemented?

  • A. Configure a bridge group in transparent mode.
  • B. Specify the BVl IP address as the default gateway for connected devices.
  • C. Add an IP address to the physical Cisco Firepower interfaces.
  • D. Enable routing on the Cisco Firepower

Answer: C

 

NEW QUESTION 33
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)

  • A. BGPv4 in transparent firewall mode
  • B. BGPv6
  • C. ECMP with up to three equal cost paths across multiple interfaces
  • D. ECMP with up to three equal cost paths across a single interface
  • E. BGPv4 with nonstop forwarding

Answer: B,D

 

NEW QUESTION 34
An engineer is monitoring network traffic from their sales and product development departments, which are on two separate networks What must be configured in order to maintain data privacy for both departments?

  • A. Use a dedicated IPS inline set for each department to maintain traffic separation
  • B. Use passive IDS ports for both departments
  • C. Use 802 1Q mime set Trunk interfaces with VLANs to maintain logical traffic separation
  • D. Use one pair of inline set in TAP mode for both departments

Answer: D

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/ inline_sets_and_passive_interfaces_for_firepower_threat_defense.html

 

NEW QUESTION 35
A network engineer is tasked with minimising traffic interruption during peak traffic limes. When the SNORT inspection engine is overwhelmed, what must be configured to alleviate this issue?

  • A. Enable Pre-filter policies before the SNORT engine failure.
  • B. Enable IPS inline link state propagation
  • C. Enable Automatic Application Bypass.
  • D. Set a Trust ALL access control policy.

Answer: C

 

NEW QUESTION 36
An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass Which default policy should be used?

  • A. Maximum Detection
  • B. Connectivity Over Security
  • C. Balanced Security and Connectivity
  • D. Security Over Connectivity

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-intrusion.html

 

NEW QUESTION 37
Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?

  • A. show managers
  • B. show running-config | include manager
  • C. show configuration session
  • D. system generate-troubleshoot

Answer: A

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/b_Command_Reference_for_Firepower_Threat_Defense/c_3.html

 

NEW QUESTION 38
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)

  • A. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.
  • B. Traffic inspection can be interrupted temporarily when configuration changes are deployed.
  • C. They can block traffic based on Security Intelligence data.
  • D. File policies use an associated variable set to perform intrusion prevention.
  • E. The system performs intrusion inspection followed by file inspection.

Answer: B,C

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Access

 

NEW QUESTION 39
With Cisco FTD integrated routing and bridging, which interface does the bridge group use to communicate with a routed interface?

  • A. subinterface
  • B. bridge virtual
  • C. switch virtual
  • D. bridge group member

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transp

 

NEW QUESTION 40
......

Download Real Cisco 300-710 Exam Dumps Test Engine Exam Questions: https://www.practicetorrent.com/300-710-practice-exam-torrent.html

Free 300-710 Sample Questions and 100% Cover Real Exam Questions : https://drive.google.com/open?id=19ANpHxJkjRv2mUG2p2lN8FSYLNMquhJu