Last CTAL-TM-001 practice test reviews: Practice Test ISQI dumps
Try CTAL-TM-001 Free Now! Real Exam Question Answers Updated [Jun 23, 2024]
CTAL-TM Certification Path
6 months of experience in Software development/software testing. Successful completion of the ISTQB Certified Tester Foundation level and a minimum of three years testing experience is recommended. The Intermediate Certificate may also be helpful but is not required.
How to book CTAL-TM Exams
In order to apply for the NET, You have to follow these steps
- Go to the CTAL-TM Official Site
- Read the instruction Carefully
- Follow the given steps
- Apply for the CTAL-TM
NEW QUESTION # 22
As a result of the RAD based development approach, the test manager has decided to change the risk mitigation approach. Which test technique might be most appropriate to use? 2 credits
- A. Error Guessing
- B. Boundary Value Analysis
- C. Decision Table Testing
- D. Exploratory Testing
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 23
Consider the typical objectives of testing. Which of the following metrics can be used to measure the effectiveness of the testing process in achieving one of those objectives? 1 credit
- A. Percentage of requirements covered
- B. Percentage of test effort spent on regression testing
- C. Average number of days between defect discovery and resolution
- D. Lines of code written per developer per day
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 24
Continuing with the Scenario described in the previous question, which of the following topics would you need to address in detail in the master test plan? 3 credits
- A. An approach to regression testing
- B. A description of dependencies between test cases
- C. A list of boundary values for "advance amount"
- D. A logical collection of test cases
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 25
During test process improvement it is recommended to use standards where possible. Standards originate from various sources and they cover different subjects in relation to testing Pick TWO sources of software standards, useful to software testing from the ones mentioned below. 1 credit
- A. SY-395-01 'Standard for East Coast Hospital software' is a regional standard adapted from a
national one. Besides hospital software, this standard ought to be used also by other types of
software system in the region. - B. BS-7925-2 'Software testing. Software component testing is a national standard used
internationally. It covers a number of testing techniques that may be useful both on component
testing level and on system testing level. - C. ISA 4126-1 'Software engineering- Product quality Part 1:
Quality model' is an international standard, that provides a basis on which to define quality
assurance solutions. - D. ISO 9126-1 'Software engineering- Product quality Part 1:
Quality model' is an international standard, that provides a basis on which to define quality
assurance solutions. - E. IEEE 829 'standard for software test documentation' is an international standard to be following
mandatory by all testing origination regardless of lifecycle models.
Answer: B,D
NEW QUESTION # 26
You have investigated different possibilities and selected four of them to present to IT management. Which of the proposals will you most likely give your highest recommendations? 3 credits
- A. Internal offer from the development department of XYZ to create the regression package using CppUnit as test automation tool. One of the development groups have very good experiences in automating unit tests, and they are willing to do training as well.
- B. Insourcing of test automation based on an offer from a local company ABC that has people who are specialists in system level capture-replay automation tools and they also do regular training courses in test automation methods and tools. They can then work closely with Vicki.
- C. Outsourcing of test automation based on an offer from an Asian company, AsiaAutoTest, which has people who are specialists in system level capture-replay automation tools. They also offer training and besides they offer to run and maintain the regression tests in the future.
- D. Solution from a tool vendor offering to educate two test team members in the use of their easyto- use test automation capture replay tool over the first 3 month and based on that build the regression test suite. In addition to Vicki, Steve is the only one that has time available to be educated.
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 27
Which work experience is likely to develop the necessary skills to effectively test a software system? [3]
- A. Being the developer of testing tools used for automation
- B. Being a former Test Manager
- C. Being the current Project Manager for the system
- D. Being a member of the production group that supported the previous release of the system
Answer: A
Explanation:
Being the developer of testing tools used for automation is likely to develop the necessary skills to effectively test a software system because it involves a deep understanding of testing processes and the creation of tools that facilitate these processes. This experience provides insight into the intricacies of test automation, which is crucial for designing effective tests and ensuring thorough coverage of the system under test.
References: The current page suggests referring to the ISTQB Advanced Level Test Manager Syllabus and other ISTQB documents for a comprehensive understanding of the roles and skills required for effective software testing. It emphasizes the importance of alignment of methodologies in distributed testing models, which is relevant to the development and use of testing tools.
NEW QUESTION # 28
You are reviewing the project's traceability matrix after the first cycle of testing. You have discovered that new requirements have been introduced and others have changed.
What should you do? [2]
- A. Re-assess the test coverage.
- B. Ask for more time and budget for testing.
- C. Assign the new requirements to a maintenance release, update the test documentation for the changed requirements.
- D. Update the "lessons learned" document to avoid future issues similar to this.
Answer: A
Explanation:
The best action that you should take in this situation is to re-assess the test coverage. This is because the traceability matrix is a document that shows the relationship between the requirements and the test cases, and it can be used to measure the test coverage, which is the degree to which the requirements are tested. If new requirements have been introduced and others have changed, the test coverage may be affected, and some test cases may become obsolete or incomplete. Therefore, you should re-assess the test coverage and update the test cases accordingly, to ensure that the testing is consistent with the current requirements and the test objectives. Traceability Matrix - ISTQB not-for-profit association References: Certified Tester Advanced Level Test Manager (CTAL-TM) - ISTQB not-for-profit association, ISTQB Test Manager Certification - ISTQB Exams Worldwide - ISTQB Official Registration, Traceability Matrix - ISTQB not-for-profit association
NEW QUESTION # 29
Which of the following is NOT a typical key challenge for testing in a RAD based development approach? 1 credit
- A. Project management and control
- B. Time-boxing
- C. Re-usable test scripts for (automated) regression testing
- D. No complete requirements specification
Answer: A
NEW QUESTION # 30
IEEE 1028 also defines "management review" as a type of review. What is the main purpose of a management review? 1 credit
- A. Align technical concepts during the design phase
- B. Establish a common understanding of requirements
- C. To monitor progress, assess the status of a project, and make decisions about future actions
- D. Provide independent evaluation of compliance to processes, regulations, standards etc.
Answer: C
NEW QUESTION # 31
Your test process is fully integrated into the software development lifecycle. You are at which TMMi level?
[1]
- A. Optimized
- B. Defined
- C. Initial
- D. Managed
Answer: B
Explanation:
According to the TMMi model, the test process is fully integrated into the software development lifecycle at the Defined level. This level establishes that all projects are following the same standards and procedures throughout the organization or organizational unit. Test is integrated into the development life cycle and into all projects from early in development. TMMi ModelTMMi Introduction References:
* TMMi Model - TMMi
* What is TMMI (Test Maturity Model Integration) in Software Testing?
NEW QUESTION # 32
A number of options have been suggested for the level of independence to be employed for the testing on the next project, and are shown below.
i. External test specialists perform non-functional testing.
ii. Testing is outsourced.
iii. Testing is carried out by the developer.
iv. A separate test team carries out the testing.
v. Testing is performed by the business.
vi. Testing is performed by a different developer.
Which of the following orders the above in a correct order of independence? 1 credit
- A. i, iv, v, vi
- B. i, ii, iv, vi
- C. ii, v, i, iii
- D. ii, i, v, vi
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 33
As part of the test strategy, entry and exit criteria will be defined for each test level. Which is NOT a valid reason for using entry and exit criteria? 1 credit
- A. Entry and exit criteria are a principal way for getting adequate resources.
- B. Using entry and exit criteria will prevent software that is not or poorly tested from going to the next test level.
- C. The expectation is that development testing is not adequate.
- D. Exit criteria are used to decide on when to stop testing.
Answer: A
NEW QUESTION # 34
Which of the following is an advantage of specifying test conditions at a detailed level? [1]
- A. Can be used to identify test coverage gaps
- B. Can be used to leverage use cases for acceptance testing
- C. Saves time
- D. Improves maintainability and reduces ownership costs for the testware
Answer: A
Explanation:
The correct answer is A. Can be used to identify test coverage gaps. This is because test conditions are the items or events of a component or system that will be verified by one or more test cases. Specifying test conditions at a detailed level can help to identify test coverage gaps, which are the areas or aspects of the component or system that are not covered by the test conditions or test cases. By identifying test coverage gaps, the test team can ensure that the testing is complete and consistent with the test objectives and scope. Test Conditions - ISTQB not-for-profit association References: Certified Tester Advanced Level Test Manager (CTAL-TM) - ISTQB not-for-profit association, ISTQB Test Manager Certification - ISTQB Exams Worldwide - ISTQB Official Registration, Test Conditions - ISTQB not-for-profit association
NEW QUESTION # 35
Instead of having an independent test team within the company, the company is considering to outsource testing. What are THREE key challenges that are typical for outsourcing? 1 credit
- A. Applying test automation
- B. Possibly different cultures
- C. Audit trail from requirements to test cases
- D. Test environment more complex
- E. Define expectation for tasks and deliverables
- F. Testing of non-functional requirements
- G. Clear channels of communications
Answer: B,E,G
NEW QUESTION # 36
Which of the following would you least expect to form part of the analysis of initial tool costs? 1 credit
- A. Tool portability
- B. Learning time required to use the new tool
- C. Evaluation of suitable tools
- D. Integration with other tools
Answer: A
Explanation:
Topic 4, Scenario 4, V2 "Test Management Tool"
The project situation after 11 months is:
-
The first increment was released one week late but contained sufficient functionality to be declared fit for purpose'. However, there were 20 outstanding incidents deferred to increment two.
-
The amount of voluntary overtime worked PV the test team has reduced the second Increment slippage to just 3 weeks.
-There is talk of reducing the scope of requirements. The purpose of this is to first deliver the application with support for manual testing and then to provide a delivery * weeks later to resolve any remaining points and provide support for automated testing (i.e. the link to the capture-replay tool).
-Concerns have been expressed by a section of the user community, that in some places the usability is very poor.
NEW QUESTION # 37
You are responsible for porting a performance testing tool to a new operating system. You are at what stage in the tool's lifecycle? [1]
- A. Evolution
- B. Retirement
- C. Acquisition
- D. Support and Maintenance
Answer: A
Explanation:
According to the tool lifecycle model, the evolution stage is when the tool is adapted to new requirements or environments, such as a new operating system. This stage involves modifying the tool to meet the changing needs of the users and the system. The evolution stage is followed by the retirement stage, when the tool is no longer used or supported. Tool Lifecycle ModelSoftware Testing Tools References:
* Work with performance and monitoring tools in finance and operations apps
* Software Testing Tools: A Comprehensive Guide
NEW QUESTION # 38
In general which part of the testing activity is most difficult to estimate? 1 credit
- A. Test execution
- B. Test management
- C. Test planning
- D. Test design
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 39
Regarding the process described above, what is the most important recommendation you would make using IEEE 1044 as a guide? 2 credits
- A. No classification on type of incident
- B. No mentioning of reproduceability
- C. No priority or severity assigned
- D. Incident numbering is manual rather than automated
Answer: C
Explanation:
Topic 12, Scenario 12 "Automatic Teller Machine (ATM)"
You are a test manager in charge of integration, system and acceptance testing for a bank. You are working on a project to upgrade an existing ATM to allow customers to obtain cash advances from supported credit cards.
The system should allow cash advances from EUR20 to EUR500, inclusively, for all supported credit cards. The supported credit cards are American Express, VISA, Eurocard and Mastercard.
In the master test plan the following items are listed in the section named "items and/or features to be tested":
I All supported credit cards
II Language localization
II Valid and invalid advances
IV Usability
V Response time
NEW QUESTION # 40
You are the Test Manager for a critical system and are using a risk-based approach for this project.
Which of the following would most clearly convey the current status to project stakeholders? [3]
- A. A bar graph showing defect density
- B. A scatter chart showing test execution status
- C. A Pareto graph showing requirements coverage
- D. A pie chart showing residual risk
Answer: D
Explanation:
The most clear way to convey the current status to project stakeholders is to use a pie chart showing residual risk. This is because a risk-based approach focuses on identifying, analyzing, and prioritizing the risks that may affect the quality of the system, and allocating testing resources accordingly. A pie chart can visually represent the proportion of each risk category (such as high, medium, or low) in the overall risk profile, and show how much risk has been reduced or remains after testing. This can help the stakeholders to understand the current level of confidence in the system, and the potential impact of any remaining risks. References: Certified Tester Advanced Level Test Manager (CTAL-TM) - ISTQB not-for-profit association, ISTQB Test Manager Certification - ISTQB Exams Worldwide - ISTQB Official Registration, Managing the Test Team - ISTQB not-for-profit association
NEW QUESTION # 41
The introduction of reviews and inspections has often failed as a process improvement action.
Identify the THREE most important measures that should be taken to reduce the risk that this test process improvement will fail. 2 Credits (for 2 out of 3 correct 1 credit)
- A. Usage of a more traditional software development lifecycle
- B. Alignment with software process improvement
- C. The availability of stands and processes
- D. Training of those involved
- E. Process ownership and experienced moderators who drive the inspection process.
- F. Management support
- G. Using a reference model, e.g. TMMi
Answer: D,E,F
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 42
Select THREE issues from the options provided that should at least be raised. 1 credit
- A. Do we have a set of tool requirements to validate the tool against?
- B. What are the problems we are trying to address?
- C. How will the implementation be organized?
- D. Which project will be selected to perform the tool pilot?
- E. Is customized training available?
- F. Has there been sufficient comparison of tools?
- G. How will the change process be managed?
Answer: A,B,F
NEW QUESTION # 43
The test improvement project will take place in an organization developing a safety-critical avionics application. Which one of the following standards do you believe would be most appropriate to take into account for compliance during your assignment? 1 credit
- A. IEEE 829
- B. ISO 9126
- C. BS 7925/2
- D. DO-178B
Answer: D
NEW QUESTION # 44
Which technique will assist you in determining targeted improvement areas to reduce the number of defects?
[1]
- A. Pareto analysis
- B. Cost of quality analysis
- C. Defect triage
- D. Test coverage assessment
Answer: A
Explanation:
The technique that will assist you in determining targeted improvement areas to reduce the number of defects is Pareto analysis. This is because Pareto analysis is a method of identifying and prioritizing the most significant causes of defects, based on the principle that 80% of the problems are caused by 20% of the causes.
By applying Pareto analysis, you can focus on the improvement areas that will have the most impact on reducing the number of defects. Pareto Analysis - ISTQB not-for-profit association References: Certified Tester Advanced Level Test Manager (CTAL-TM) - ISTQB not-for-profit association, ISTQBTest Manager Certification - ISTQB Exams Worldwide - ISTQB Official Registration, Pareto Analysis - ISTQB not-for-profit association
NEW QUESTION # 45
In addition to introducing the new team member, you have decided to raise motivation. Which of the measures listed below would be the best measure to take in order to increase the motivation of the team? 2 credits
- A. Provide more time for testing in the schedule
- B. Organize a meeting with senior management in which they address the importance of good testing for this project
- C. Allow people to take some time off
- D. Introduce entry criteria to the testing phase
Answer: B
NEW QUESTION # 46
......
Get Ready to Pass the CTAL-TM-001 exam with ISQI Latest Practice Exam : https://www.practicetorrent.com/CTAL-TM-001-practice-exam-torrent.html
Get Prepared for Your CTAL-TM-001 Exam With Actual ISQI Study Guide!: https://drive.google.com/open?id=1Up1FieFeeYSH4T2xGQDFH4QTs7R6QF0J