May-2026 Nutanix NCA-6.10 Actual Questions and Braindumps [Q16-Q39]

May-2026 Nutanix NCA-6.10 Actual Questions and Braindumps

NCA-6.10 Dumps To Pass Nutanix Exam in 24 Hours - PracticeTorrent

NEW QUESTION # 16
An administrator needs to implement a disaster recovery plan. The company has two sites, each with its own Nutanix AHV cluster. Latency between the sites is 30ms.
Which built-in functionality in Prism Element could the administrator use to enable disaster recovery between the two clusters?

• A. Data Protection
• B. Metro Cluster
• C. Protection Policies
• D. Recovery Plan

Answer: B

Explanation:
TheData Protectionfeature in Prism Element provides built-in disaster recovery capabilities by enabling asynchronous replication between Nutanix clusters. With a latency of 30ms between the two sites, asynchronous replication can ensure that data is replicated efficiently while adhering to recovery point objectives (RPO). The administrator can configure Protection Domains and Replication Targets to set up DR between the clusters.
* A. Recovery Plan:Incorrect, as Recovery Plans are part of Prism Central for orchestrated failover, not Prism Element.
* B. Protection Policies:Incorrect, as these are defined under Prism Central.
* C. Data Protection:Correct, as it enables disaster recovery via replication configurations in Prism Element.
* D. Metro Cluster:Incorrect, as Metro Cluster requires low latency (<5ms) and is not suitable for a
30ms latency scenario.
References:
Nutanix Data Protection and Disaster Recovery Guide.
Nutanix Bible: Data Protection Overview.

NEW QUESTION # 17
An administrator is considering a data protection strategy between two sites. There is a 10ms round trip latency between the two clusters. Which data protection solution can the administrator implement that minimizes data loss in the event of a disaster?

• A. Async DR
• B. Metro Availability
• C. Synchronous Replication
• D. NearSync Replication

Answer: D

Explanation:
The correct answer isA. NearSync Replication.
Key Concepts from Official Nutanix Documentation:
Nutanix supports various types of data replication methods depending on the Recovery Point Objective (RPO), Recovery Time Objective (RTO), and the latency between the sites.
* Metro Availabilityrequires a maximum latency of<5ms RTTand is used forzero RPO synchronous replication. Since the given latency is 10ms,Metro Availability is not supportedin this case.
Reference: Nutanix Bible - Metro Availability Section
Prism UI Navigation: Protection Domains > Metro Availability
Synchronous Replicationis often synonymous withMetro Availabilityin Nutanix's implementation. Thus, it is similarly bound by the <5ms RTT requirement.
Async DR (Asynchronous Disaster Recovery)allows for more relaxed RPOs, typically1 hour or more, which doesnot minimize data lossin the event of a disaster.
NearSync Replicationsupports anRPO as low as 1 minuteand issuitable for up to 20ms RTT latency. It utilizeslightweight snapshotsandschedule-based replicationto deliverlow-RPO protectioneven over relatively long distances and moderate latencies.
Reference: Nutanix Data Protection Guide - NearSync Overview
Prism UI Navigation: Data Protection > Protection Domains > Schedule (with 1-minute RPO option) Detailed Source References:
Nutanix Data Protection and DR Guide - v5.x and later:"NearSync replication enables you to achieve RPOs as low as 1 minute and is designed to work with round-trip latencies of up to 20ms." Prism Central UI:Navigate toProtection > Data Protection > Protection Domains > Create Schedule# Set schedule type to "NearSync" and observe the 1-minute RPO options.
Hence, since 10ms RTTexceeds Metro Availability requirementsbut iswell within NearSync's acceptable latency, the best choice thatminimizes data lossis:

NEW QUESTION # 18
When using the LCM Dark Site procedure in Prism Element or Prism Central, which Nutanix software component should be checked and upgraded first?

• A. LCM Framework
• B. Foundation
• C. MSP
• D. NCC

Answer: A

NEW QUESTION # 19
Which Nutanix Support case priority level indicates that the system is available but experiencing issues that directly impact productivity?

• A. P4
• B. P3
• C. P2
• D. P1

Answer: C

Explanation:
Nutanix Support case priority levels are defined as follows:
* P1 (Critical):The system is down or severely impacted, requiring immediate attention.
* P2 (High):The system is available but experiencing issues that directly impact productivity or operations.
* P3 (Medium):The system is functioning, but there are non-critical issues or questions.
* P4 (Low):General questions or requests that do not impact system performance.
The scenario described matchesP2, where the system is available but productivity is directly affected by the issue.
References:
Nutanix Support Policy Documentation.
Nutanix Knowledge Base Article on Support Case Priorities.

NEW QUESTION # 20
Shared storage for Windows Server Failover Clustering (WSFC) is a use case for which Nutanix Unified Storage solution?

• A. RF2
• B. Files
• C. Volumes
• D. FT1

Answer: C

Explanation:
Shared storage for Windows Server Failover Clustering (WSFC) is a use case for NutanixVolumes. Nutanix Volumes provides block storage (via iSCSI) to external systems, such as WSFC nodes, allowing them to share storage for failover clustering. This configuration is essential for high availability in Windows environments.
Other options:
* Files: Provides file-based storage (NFS/SMB), not suited for WSFC shared block storage.
* FT1 and RF2: Refer to Fault Tolerance and Redundancy Factor, not storage solutions.
:
Nutanix Unified Storage Guide - Volumes Use Cases.
Nutanix Best Practices for Windows Clustering.

NEW QUESTION # 21
An administrator of an AHV cluster needs to deploy a solution that will provide self-service network provisioning and overlapping IP addresses for true multi-tenant networking with VPCs.
Which product will satisfy this requirement?

• A. Flow Virtual Networking
• B. Nutanix Database Service
• C. Nutanix Kubernetes Platform
• D. Flow Network Security

Answer: A

Explanation:
The correct answer isD. Flow Virtual Networking (FVN).
Flow Virtual Networking (FVN)is a Nutanix solution that enablesadvanced network virtualization, including:
* VPCs (Virtual Private Clouds)
* Overlapping IP address spaces
* Self-service network provisioning
* Multi-tenancy support
* Microsegmentation
FVN abstracts physical networking and allows tenants to manageisolated logical networks, providing cloud- like networking capabilities directly integrated with AHV.
Clarifications:
* A. Nutanix Kubernetes Platform (NKP):Orchestrates containers; does not provide virtualized network infrastructure.
* B. Flow Network Security:Focuses onmicrosegmentationandpolicy enforcement, not on VPC or L3 abstraction.
* C. Nutanix Database Service (NDB):Manages DBaaS; not related to networking.
Official Reference:
* Nutanix Flow Virtual Networking Tech Note
* Nutanix Documentation Portal - Flow Virtual Networking
* Excerpt: "Flow Virtual Networking provides VPCs, overlapping IPs, and self-service networking capabilities for secure multi-tenancy in Nutanix AHV clusters."

NEW QUESTION # 22
An administrator needs to implement a disaster recovery plan. The company has two sites, each with its own Nutanix AHV cluster. Latency between the sites is 30ms.
Which built-in functionality in Prism Element could the administrator use to enable disaster recovery between the two clusters?

• A. Data Protection
• B. Metro Cluster
• C. Protection Policies
• D. Recovery Plan

Answer: B

NEW QUESTION # 23
What role does a Replication Factor of 2 or 3 play in ensuring data integrity and recovery?

• A. It reduces the need for offsite backup solutions.
• B. It limits the scope of hardware failures during recovery operations.
• C. It ensures that multiple copies of data are available for recovery.
• D. It accelerates data transfer to remote backup sites.

Answer: C

NEW QUESTION # 24
An administrator is building a new Windows VM on a Nutanix AHV cluster. However, when the administrator tries to install the OS, no disks are listed as available.
What does the administrator need to do to resolve the issue?

• A. Enable Turbo Mode on the VM.
• B. Mount and install the VirtIO drivers.
• C. Mount and install the Nutanix Guest Tools.
• D. Add a second disk to the VM.

Answer: B

Explanation:
The correct answer isC. Mount and install the VirtIO drivers.
When installingWindows OSon aNutanix AHV VM, the default virtual disk controller uses theVirtIO interface, which isnot natively supported by Windows installation media. As a result, during the OS installation, the virtual disk will not appear unless theVirtIO drivers are manually provided.
Required Steps:
* Attach theVirtIO ISOto the VM.
* During the Windows installation, click"Load Driver".
* Browse to the mountedVirtIO ISOand select the appropriate storage driver.
* Once loaded, the installer will detect the virtual disk.
Clarifications:
* A (Add a second disk):Irrelevant; the issue is driver recognition, not disk quantity.
* B (Enable Turbo Mode):Related to performance, not disk detection.
* D (Install Nutanix Guest Tools):Doneafter OS installation, not before or during.
Prism UI Navigation Path:
VM > Edit > CD-ROM > Mount ISO # Select VirtIO ISO
Official Reference:
* Nutanix AHV Administration Guide - Creating Windows VMs
* Nutanix KB #5967 - AHV: Windows Installation on VirtIO
* Excerpt: "If the disk is not detected during Windows installation, the VirtIO ISO must be mounted and the appropriate storage controller driver manually installed."

NEW QUESTION # 25
For dark site clusters, what should be downloaded prior to running an LCM Inventory or updates?

• A. Nutanix Foundation Platform
• B. Nutanix Compatibility Bundle
• C. Nutanix Prism Central
• D. Nutanix Foundation

Answer: B

NEW QUESTION # 26
When multiple Alert policies are applied to an entity, which will take precedence?

• A. Policy are applied to all entities of an entity type.
• B. Policy are applied to an entity type in a category.
• C. Policy are applied to a specific entity type.
• D. Policy are applied to an entity type in a cluster.

Answer: C

NEW QUESTION # 27
An administrator wants to change from Redundancy Factor 2 to 3, but it is not allowed.
What must the administrator check?

• A. Check hardware availability of the nodes.
• B. Check AOS version and upgrade, if needed.
• C. Check that the cluster has been properly licensed.
• D. Check that the cluster has five or more nodes.

Answer: D

NEW QUESTION # 28
An administrator needs to license a new AOS-based cluster with no add-on packages via Nutanix Cloud Platform Package Licensing.
What license type would fulfill this requirement?

• A. Nutanix Unified Storage (NUS)
• B. Nutanix Database Service (NDB)
• C. Nutanix Cloud Infrastructure (NCI)
• D. Nutanix Cloud Manager (NCM)

Answer: C

Explanation:
To license a new AOS-based cluster with no add-on packages, the appropriate license type isNutanix Cloud Infrastructure (NCI). The NCI license provides the fundamental capabilities required for Nutanix clusters, including:
* Storage and data management.
* Core virtualization features.
* Compute resources for workloads.
NCI is designed for organizations that need the essential features of the Nutanix platform without additional add-ons such as database services (NDB) or advanced storage options (NUS).
Other options:
* A. Nutanix Cloud Manager (NCM):Focuses on management capabilities for multi-cloud and operational tasks, not core infrastructure licensing.
* C. Nutanix Unified Storage (NUS):Specifically provides unified file and object storage capabilities, not relevant for a base AOS cluster.
* D. Nutanix Database Service (NDB):A dedicated licensing tier for database management features.
References:
Nutanix Licensing Overview
Nutanix Support Documentation - Licensing Models.

NEW QUESTION # 29
Within Prism Central, which Compute and Storage section will allow an administrator to upload a Windows ISO file?

• A. Images
• B. Calatog Items
• C. OVAS
• D. Templates

Answer: A

Explanation:
In Prism Central, theImagessection within the Compute and Storage tab is used to upload ISO files, including Windows installation ISOs. Once uploaded, these images can be used to create or install VMs across clusters managed by Prism Central.
* A. Catalog Items:Incorrect, as this is used to manage preconfigured application templates.
* B. Templates:Incorrect, as this is used for VM templates, not ISO uploads.
* C. Images:Correct, as it allows uploading and managing ISO and disk images.
* D. OVAs:Incorrect, as this pertains to importing virtual appliances, not ISO files.
References:
Nutanix Prism Central Administration Guide: Image Management.
Nutanix University Course Content on VM Management.

NEW QUESTION # 30
An administrator wants to collect log files that have been requested by Nutanix Support.
From which Prism Element dashboard can this be accomplished?

• A. Health
• B. Alerts
• C. Analysis
• D. Settings

Answer: A

NEW QUESTION # 31
Which Nutanix offering allows for extending an on-prem datacenter into the public cloud?

• A. Nutanix Cloud Clusters
• B. Nutanix Cloud Security
• C. Nutanix Kubernetes Engine
• D. Nutanix Data Services

Answer: A

Explanation:
Nutanix Cloud Clusters (NC2)enables extending on-premises datacenters into public cloud environments, such as AWS or Azure. This solution allows administrators to seamlessly migrate workloads, scale operations, and manage resources across hybrid cloud environments using a unified control plane.
* A. Nutanix Cloud Security:Incorrect, as this focuses on securing workloads in the cloud, not extending datacenters.
* B. Nutanix Cloud Clusters:Correct, as NC2 enables hybrid cloud functionality by extending on-prem clusters into the public cloud.
* C. Nutanix Kubernetes Engine:Incorrect, as this is used for container orchestration, not hybrid cloud extension.
* D. Nutanix Data Services:Incorrect, as this refers to storage and data management capabilities.
References:
Nutanix Cloud Clusters (NC2) Documentation.
Nutanix University: Hybrid Cloud Training.

NEW QUESTION # 32
An administrator needs to automate the migration of a VM from ESXi to AHV.
Which utility should the administrator use?

• A. acli
• B. Move
• C. Flow
• D. Ncli

Answer: B

Explanation:
TheNutanix Moveutility is specifically designed for migrating VMs between hypervisors, including from ESXi to AHV. It automates the migration process while ensuring minimal downtime. Nutanix Move supports pre-migration assessments and automates data transfer and VM configuration for AHV.
* A. Move:Correct, as it is the Nutanix tool for hypervisor migrations.
* B. acli:Incorrect, as acli is used for command-line configuration and management within AHV, not migration.
* C. Flow:Incorrect, as Nutanix Flow focuses on network security and micro-segmentation.
* D. Ncli:Incorrect, as Ncli is a command-line utility for cluster management, not migration.
References:
Nutanix Move Documentation: Supported Workflows.
Nutanix University Training on VM Migration.

NEW QUESTION # 33
What is the purpose of Life Cycle Management (LCM)?

• A. To manage network configurations
• B. To simplify software and firmware upgrades
• C. To optimize server performance
• D. To automate application deployment

Answer: B

NEW QUESTION # 34
When configuring dual encryption, which key management method is supported?

• A. Native Key Manager
• B. Lockdown Mode Enabled
• C. External Key Manager
• D. Trusted Platform Module

Answer: C

NEW QUESTION # 35
An administrator wants to enable Windows Defender Credential Guard.
What must be enabled when creating the VM?

• A. UEFI
• B. Live Migration
• C. HA
• D. Legacy BIOS

Answer: A

Explanation:
To enable Windows Defender Credential Guard, the VM must be configured withUEFI(Unified Extensible Firmware Interface) instead of Legacy BIOS. UEFI provides the necessary support for Secure Boot and Virtualization-Based Security (VBS), both of which are prerequisites for Credential Guard.
Steps:
* When creating or editing the VM, selectUEFIas the firmware type.
* Ensure Secure Boot and VBS are enabled in the OS configuration.
References:
Microsoft Windows Defender Credential Guard Requirements.
Nutanix AHV VM Configuration Guide - UEFI Support.

NEW QUESTION # 36
An administrator is creating a Linux VM and must decide which is the correct timezone to choose.
Which timezone should the administrator select for this VM?

• A. Central
• B. UTC
• C. Local
• D. Eastern

Answer: B

Explanation:
The correct answer isB. UTC.
When creating Linux VMs in a Nutanix environment (or in any enterprise-grade production environment), it is best practice to use UTC(Coordinated Universal Time) as the system timezone. This ensures:
* Consistencyacross distributed systems
* Accurate log correlation
* Avoidance of issues with daylight saving time (DST)
* Simplifiedcentralized monitoring and troubleshooting
Clarifications:
* A (Eastern)andD (Central)are region-specific and may introduce time skew across systems.
* C (Local)is ambiguous and depends on the underlying hardware or hypervisor setting, which can lead to inconsistent behavior.
Official Reference:
* Linux Admin Best Practices
* Nutanix Best Practices Guide - VM Provisioning Section
* Excerpt: "For consistency across environments, it is recommended to configure all Linux virtual machines to use UTC timezone, particularly in clustered and distributed applications."

NEW QUESTION # 37
An administrator needs to automate the migration of a VM from ESXi to AHV.
Which utility should the administrator use?

• A. acli
• B. Flow
• C. Move
• D. Ncli

Answer: B

NEW QUESTION # 38
An administrator needs to license a new AOS-based cluster with no add-on packages via Nutanix Cloud Platform Package Licensing.
What license type would fulfill this requirement?

• A. Nutanix Unified Storage (NUS)
• B. Nutanix Database Service (NDB)
• C. Nutanix Cloud Infrastructure (NCI)
• D. Nutanix Cloud Manager (NCM)

Answer: C

NEW QUESTION # 39
......

Download the Latest NCA-6.10 Dump - 2026 NCA-6.10 Exam Question Bank: https://www.practicetorrent.com/NCA-6.10-practice-exam-torrent.html

Buy Latest NCA-6.10 Exam Q&A PDF - One Year Free Update: https://drive.google.com/open?id=1wOeRLEOo8A8P2YyquAxEwUjUYQWJMg_h