Pass ISQI CTFL-AcT Exam in First Attempt Guaranteed [May-2026]
Exam Sure Pass ISQI Certification with CTFL-AcT exam questions
ISQI CTFL-AcT certification exam is an excellent way for professionals involved in acceptance testing to demonstrate their knowledge and expertise in this important area. It is a globally recognized certification that can help professionals advance their careers and increase their earning potential. By earning this certification, professionals can demonstrate their commitment to quality and their ability to deliver high-quality software that meets the needs of their customers.
ISQI CTFL-AcT Exam is ideal for professionals who are involved in software testing, quality assurance, project management, and software development. CTFL-AcT exam allows individuals to develop a foundational understanding of acceptance testing that can be applied to all software solutions, regardless of the industry they are in. CTFL-AcT exam will equip individuals with the necessary knowledge and tools to design effective acceptance tests, perform test planning, and improve communication with stakeholders.
ISQI CTFL-AcT certification is ideal for professionals who are involved in software development and testing, including testers, software developers, quality assurance professionals, and project managers. It is also suitable for individuals who wish to enhance their skills and knowledge in acceptance testing and improve their career prospects. With this certification, candidates can demonstrate their competency and expertise in acceptance testing, which can help them stand out in the job market and advance their careers.
NEW QUESTION # 12
Suppose you are an acceptance tester in a project developing a medical scanner. The scanner is meant to be used in a hospital and should allow the examination of at leaser 50 patients per day. Which one of the following perspectives is MOST affected, if the produce does not meet the specified performance requirements?
- A. User perspective
- B. Functional perspective
- C. Business perspective
- D. Technical perspective
Answer: C
Explanation:
The medical scanner must be able to examine at least 50 patients per day. This requirement directly impacts hospital operations and service efficiency. If the scanner fails to meet performance requirements, such as processing speed or availability, it will affect the hospital's ability to deliver services to patients - impacting schedules, patient flow, and ultimately the business goals of the hospital.
Option C is correct because it reflects the consequences of performance shortfalls from a business outcome perspective: failure to meet this requirement may result in financial loss, compliance issues, or customer dissatisfaction.
Other options:
A (User perspective) is involved, but the impact here is primarily operational/business.
B (Functional perspective) refers to whether the scanner has the correct features, not performance.
D (Technical perspective) is also relevant, but the business impact (e.g., service delivery) takes precedence in this case.
NEW QUESTION # 13
Which of the following activities is most likely performed by the business analyst as part of defect analysis?
- A. Check, whether other paths in the business process model perform as intended.
- B. Assess the impact of corrective actions on other parts of the system's implementation.
- C. Analyze the function that failed step by step to identify the cause of the defect.
- D. Identify the requirements / user stories that are not satisfied.
Answer: D
NEW QUESTION # 14
Which one of the following usability testing techniques matches the test objective BEST?
- A. Expert reviews help to understand how users interact with a system and what is more or less visible.
- B. Walkthrough and thinking aloud methods can indicate difficulties users experience with certain tasks.
- C. Biometrics-based evaluation help to understand retrospectively, how users interacted with the system and to improve it.
- D. Log file analysis performed by usability experts identifies strong points of an interface that attract the user's attention.
Answer: B
Explanation:
Usability testing involves evaluating a product by observing real users performing tasks. The "think-aloud" method is a cornerstone of qualitative usability testing. Test participants verbalize their thoughts while interacting with the system, revealing what they understand, find confusing, or expect. This method helps identify usability problems tied to user behavior and thought processes.
Option D is correct because it directly reflects this principle - walkthroughs and think-aloud sessions highlight pain points users face while performing tasks.
Other options:
A describes expert reviews but incorrectly attributes user insight, which is less direct.
B misunderstands biometrics - they measure physiological responses (e.g., stress, eye movement) but don't explain behavior retrospectively.
C is incorrect - log files show user actions, but identifying "strong points" like visual attraction requires observation, not just logs.
D). Walkthrough and thinking aloud methods can indicate difficulties users experience with certain tasks.
=======
NEW QUESTION # 15
The standard ISO 25010 defines a quality in use model with characteristics and subcharacteristics. Which elements of the following list is a characteristic of quality in use according to this standard?
- A. Usability
- B. Portability
- C. Compatibility
- D. Efficiency
Answer: D
Explanation:
ISO/IEC 25010 defines two key quality models:
Product Quality Model (e.g., Usability, Security, Portability)
Quality in Use Model - which includes characteristics of the user's experience when interacting with the product in a real-world context.
The four main characteristics of the Quality in Use model are:
Effectiveness
Efficiency
Satisfaction
Freedom from risk
Option A - Efficiency is one of the key Quality in Use characteristics, as it refers to the resources used to achieve goals with accuracy and completeness.
Other options:
B (Usability), C (Compatibility), and D (Portability) are characteristics of the Product Quality Model, not of Quality in Use.
Therefore, the correct answer, as per ISO 25010:2011, is:
NEW QUESTION # 16
In a project to develop an online booking system, the team decided to strengthen collaborative work between the business analyst and the testers working on the project. Several concrete joint activities have been identified.
- A. Definition of Beta Testing sessions
- B. Review of risk to prioritize acceptance test
- C. Development of acceptance criteria for user stories
- D. Business needs assessment
Answer: C
Explanation:
Collaboration between business analysts and testers is critical in Agile and acceptance testing environments.
One of the most effective areas of cooperation is the joint development and review of acceptance criteria for user stories. This ensures that criteria are testable, clearly defined, and aligned with stakeholder expectations.
Option B is correct because creating acceptance criteria is where both business analysts (who understand the business needs) and testers (who ensure testability and clarity) contribute effectively.
Other options:
A (Business needs assessment) is typically a responsibility of business analysts, not a joint activity with testers.
C (Review of risk to prioritize acceptance tests) is a valuable activity but comes after criteria are defined.
While it can be collaborative, it's more specific to test planning.
D (Definition of Beta Testing sessions) is less relevant to ongoing collaborative work between testers and BAs - this involves users and release planning.
B). Development of acceptance criteria for user stories
NEW QUESTION # 17
You are leading a brand new project team whose members are coming from all over the organization and have no former experience in working together. You need to build a common vision and team spirit. What workshop would fit BEST:
- A. You ask every member in turn to write down three things he/she likes and dislikes in the organization and to post them on a wall. A volunteer is then chosen to read randomly some posts that are then discussed with the group.
- B. You draw a staircase with 11 steps, each of them representing a major milestone of the project. The bottom of the stairs corresponds to the first day of the project and the upper step means that the project is released. You locate the present situation in the top of the stairs. The team is asked to identify and discuss the major steps downwards.
- C. You invite every member in turn to describe his/her past experience and his/her major achievements in the organization or in their former job.
- D. You invite the team members and ask them to design their own (team-wise) emblem representing their values, beliefs, goals, tasks together than a common motto.
Answer: D
Explanation:
Comprehensive Detailed Explanation (Approx. 200 words):
Building a new team with members from diverse backgrounds requires activities that foster shared values, identity, and trust. Designing a team emblem with values, goals, and a motto is a well-known team-building technique often used in Agile kick-offs. It engages creativity, sparks discussion about shared purpose, and reinforces a collective team identity.
Option A is correct because it supports both vision and team spirit - crucial for newly formed teams.
Other options:
B focuses on individual backgrounds but may not build a collective vision.
C risks highlighting negative views about the organization and may not foster trust at the early stage.
D uses a "staircase" metaphor but incorrectly locates the team at the top of the stairs - potentially signaling an endpoint rather than a beginning, making it inappropriate for a new team.
A). You invite the team members and ask them to design their own emblem...
NEW QUESTION # 18
Which one of the following statements regarding acceptance criteria is true?
- A. Testers should not be involved in writing acceptance criteria to make sure that the test is independent.
- B. In acceptance test-driven development (ATDD., acceptance criteria replace acceptance tests.
- C. Acceptance criteria specify what shall be tested to verify that a requirement or user story has been implemented correctly.
- D. Acceptance criteria are specific to agile frameworks where they correspond to functional requirements.
Answer: C
Explanation:
Comprehensive Detailed Explanation (Approx. 200 words):
Acceptance criteria are an essential part of requirements engineering and test design. According to the ISTQB CTFL Acceptance Testing Syllabus, acceptance criteria are defined as a set of statements that specify what must be true for a system, feature, or user story to be considered acceptable to stakeholders. These criteria are used as the basis for developing acceptance test cases and help bridge the communication between stakeholders, business analysts, developers, and testers.
They are not exclusive to Agile frameworks (contrary to option A); while common in Agile (e.g., as part of a user story), they are equally valuable in traditional lifecycles. Option B is incorrect because testers are encouraged to collaborate in defining acceptance criteria early to ensure testability and clarity. Option C incorrectly states that acceptance criteria replace acceptance tests in ATDD (Acceptance Test-Driven Development). In fact, acceptance criteria are transformed into acceptance tests during ATDD.
Exact Reference - ISTQB CTFL Acceptance Testing Syllabus (Section 2.1):
"Acceptance criteria describe the conditions under which a requirement, user story, or business process is considered successfully implemented. They provide the foundation for acceptance testing and serve as input to test case development." Therefore, option D is the most accurate.
NEW QUESTION # 19
Which one of the following statements regarding performance testing is MOST correct?
- A. The performance of the system is measured in a context that reflects, as far as possible, representative operating conditions.
- B. Depending on the model used to simulate the workload, performance tests are called load, stress or endurance / stability tests.
- C. Performance testing aims to determine a system's robustness against malicious attacks.
- D. The performance test results serve to determine hardware and software performance requirements.
Answer: A
NEW QUESTION # 20
Which one of the following statements describes correctly how acceptance testing may be augmented with other test techniques or approaches?
- A. In a model-based testing approach, acceptance tests are generated from graphical or textual models.
- B. In a black-box testing approach, acceptance test scenarios follow the implemented sequence of function calls in the code.
- C. In a risk-based testing approach, acceptance criteria are derived from the tester's experience and intuition.
- D. In a priority-based testing approach, prioritization of acceptance tests depends on identified product risks.
Answer: A
Explanation:
Model-Based Testing (MBT) is a test design technique in which test cases are derived from a model that describes some aspects of the system's behavior. In the context of acceptance testing, MBT can be used to generate high-level acceptance test cases automatically from business process models, use case diagrams, state models, or decision tables.
Option A is correct because MBT supports the systematic generation of acceptance test cases from these models, enabling better coverage of business rules and workflows while maintaining traceability to the requirements.
Other options:
B is close but slightly off: prioritization of acceptance tests in a priority-based approach depends on business value or stakeholder-defined priorities, not strictly on product risks.
C is incorrect. Risk-based testing relies on structured risk assessment, not just intuition or experience.
D is false. Black-box testing focuses on inputs and outputs without referencing the internal structure (such as function calls), which is characteristic of white-box testing.
Exact Reference - ISTQB CTFL Acceptance Testing Syllabus (Section 2.3):
"Model-based testing can be used to generate acceptance test cases systematically based on models representing business processes or system behavior."
NEW QUESTION # 21
As a tester you are part of a development team for health monitoring system to record and synchronize various health parameters, calculate health score and provide practical advice on how to maintain and improve health. You are asked to review the acceptance criteria for the following user story:
US23; As a user of the system. I can monitor my blood pressure and obtain alerts in case of excessive pressure, in order to prevent the risk associated with hypertension.
Which of the following is NOT a good example of an acceptance criterion for this requirement?
- A. The alert thresholds depend on the following user's personal settings: age, weight and gender
- B. The system should be developed using Java script framework to allow fast response times
- C. The monitoring system displays the heart rate together with the blood pressure
- D. People with hypertension are advised to get their blood pressure checked at least thrice a week
Answer: B
Explanation:
Acceptance criteria describe what the system must do to fulfill a requirement from the user or business perspective. They must be observable, testable, and relevant to the business outcome or expected behavior.
In this scenario, the user story is about monitoring blood pressure and receiving alerts for excessive pressure.
The acceptance criteria should focus on system behavior, thresholds, and how alerts are triggered based on user settings.
Option D is not a good acceptance criterion because:
It specifies a technical implementation detail (JavaScript framework), which is not the concern of acceptance testing.
Acceptance criteria should not prescribe how the system is built, but what it must do from a business or user point of view.
Other options (A, B, and C) all reflect testable and behavior-focused outcomes linked to the user story's goal.
D). The system should be developed using JavaScript framework to allow fast response times
NEW QUESTION # 22
Which of the following techniques is most likely applied to ensure the quality of acceptance testing activities?
- A. Checklist-based verification of requirements to ensure their completeness and quality.
- B. Verification of the traceability between user stories and test cases to make sure it is up to date.
- C. Review of the source code to ensure traceability of user stories to system components.
- D. Eye tracking to verify the feasibility of previously defined user acceptance tests.
Answer: B
NEW QUESTION # 23
Which one of the following combinations of given perspective and statement matches BEST?
- A. From a business perspective, computing power and architecture are major parameters for fine- tuning the system.
- B. From a technical perspective, the number of concurrent user and the types of transactions performed are major elements.
- C. From a user perspective, missing feedback from the system when processing a request it is a problem.
- D. From a business perspective, the choice of performance test tools strongly depends on the applied test techniques.
Answer: C
NEW QUESTION # 24
Which one of the following statements defines beta testing BEST?
- A. Beta testers discover defects in the product that escaped during the development process.
- B. During beta testing, genuine users define the acceptance criteria for various realistic configurations.
- C. Beta testing takes place early in the development process to acquire feedback from the market.
- D. Beta testing is performed by developers at the customer's location.
Answer: A
Explanation:
Beta testing is conducted after internal development and testing activities have concluded. It serves as a last line of defense before release by involving real users in real-world usage. One of its primary purposes is to uncover defects, usability problems, or configuration issues that were not found during structured testing.
Option D is correct because it captures the essential role of beta testing - to identify issues in the field that may have slipped past internal test processes, including edge cases or environmental incompatibilities that were not part of the standard test environments.
Other options are incorrect:
Option A is incorrect - beta testing is not performed by developers, and usually not at the customer's site under development supervision.
Option B is misleading - beta testing occurs late in the process, not "early in development." Option C is inaccurate - beta testing is not about defining acceptance criteria. Those should already be established. Beta testers validate the product against those criteria or their practical needs.
Exact Reference - ISTQB CTFL Acceptance Testing Syllabus (Section 3.2):
"Beta testing is performed by users and may identify defects or issues that were not found during internal testing due to differences in environments, workflows, or usage patterns."
NEW QUESTION # 25
Which one of the following statements describes an exploratory test charter BEST?
- A. The test charter is elaborated during the testing session according to test execution results.
- B. Indicating that the tester should take the role of a novice user can be part of an exploratory test charter.
- C. Each exploratory test charter is based on a previously defined list of activities that would be interesting to test.
- D. Acceptance testers use the exploratory test charter during the testing session to define the test oracle.
Answer: B
Explanation:
An exploratory test charter is a high-level plan or mission statement for a time-boxed exploratory testing session. It guides what the tester should focus on during the session and may include the goal of the test, specific areas of the system under test, the risk or feature to explore, the type of persona to simulate (e.g., novice or expert user), and possibly known issues to watch out for.
Option A is correct because specifying a user persona (such as a novice user) helps the tester approach the system from that perspective. This supports the goal of exploratory testing: to simulate realistic usage and uncover issues that scripted tests might miss.
Option B is incorrect - although exploratory testing is adaptive, the charter is defined before the session starts, not elaborated during execution.
Option C is misleading - charters may refer to areas of interest, but not necessarily to a predefined list of activities.
Option D is incorrect - a test oracle (i.e., the mechanism for determining whether a result is correct) is not defined by the charter. It may exist already or be inferred from requirements, heuristics, or user expectations.
Exact Reference - ISTQB CTFL Acceptance Testing Syllabus (Section 3.1):
"Charters define the focus of exploratory testing sessions and may specify the tester's role or perspective (e.
g., novice user)."
NEW QUESTION # 26
Which one of the following statements regarding the graphical representation of business processes is true?
- A. Business processes should be described graphically using the DMN standard and completed with decision tables.
- B. Graphical representations of business processes must describe the complete workflow in detail, including alternative and error scenarios.
- C. For acceptance testing, graphical business process models should focus on the user workflows to be tested.
- D. Using decision tables in BPMN allows defining test conditions corresponding to the business rules under test.
Answer: C
NEW QUESTION # 27
......
Real ISQI CTFL-AcT Exam Questions Study Guide: https://www.practicetorrent.com/CTFL-AcT-practice-exam-torrent.html
Download Real CTFL-AcT Exam Dumps for candidates. 100% Free Dump Files: https://drive.google.com/open?id=19TwC-5SzOrA_pfaHokE9aaEudSqh8mKK