Cisco 350-501 Practice Verified Answers - Pass Your Exams For Sure! [2021]
Valid Way To Pass CCNP Service Provider's 350-501 Exam
NEW QUESTION 129
Refer to the exhibit:
This configuration is being applied on an IOS XR router.
Which statement about this configuration is true?
- A. It is used to identify traps for SNMP polling
- B. It is used to create a subscription to specify the streaming interval
- C. It is used to create a sensor-group and has a list of YANG models for streaming
- D. It is used to identify MIB entries and has a list of YANG models
Answer: C
NEW QUESTION 130
You are testing the capabilities of MPLS OAM ping.
Which statement is true?
- A. An LSP breakage results in the ingress MPLS router never receiving any reply
- B. An LSP is not required for the reply to reach the ingress MPLS router
- C. MPLS OAM ping works solely with P2P LSPs
- D. MPLS OAM ping works solely with Cisco MPLS TE
Answer: B
NEW QUESTION 131
Refer to the exhibit:
Which statement about the status of the neighbor relationship between R1 and R2 is true?
- A. The neighbor relationship is down because the two routers are configured with different area types
- B. The neighbor relationship is down because the two routers are in the same subnet.
- C. The neighbor relationship is up because R2 is level 1 and level 2 router.
- D. The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different area
Answer: B
NEW QUESTION 132
Refer to the exhibit:
R1 and R2 are directly connected with Fast Ethernet interfaces and have the above configuration applied OSPF adjacency is not formed. When the debug ip ospf hello command is issued on R1. these log messages are seen.
Which command can be configured on routers R1 and R2 on fO/O interfaces to form OSPF adjacency?
- A. ip ospf network point-to-point
- B. ip ospf network point-to- multipoint non-broadcast
- C. ip ospf network non-broadcast
- D. ip ospf network broadcast
Answer: A
NEW QUESTION 133
Refer to the exhibit:
A network engineer is implementing a BGP protocol. Which effect of the locat-as keyword in this configuration is true?
- A. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 and the VPNv4 address family
- B. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 and the VPNv4 address family
- C. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 without additional configuration.
- D. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 without additional configuration
Answer: C
NEW QUESTION 134
Refer to the exhibit:
Which statement describes this configuration?
- A. Router 1 has its running configuration locked so changes can be made only when the administrator issues a kill session
- B. Router 1 has a new data store to collect SNMP information, but configuration must still be done at the CLI only
- C. Router 1 can be remotely managed by the CLI using Telnet
- D. Router 1 has a temporary data store where a copy of the running configuration can be manipulated and verified before committing the configuration
Answer: D
NEW QUESTION 135
Drag and drop the functionalities from the left onto the correct target fields on the right.
Answer:
Explanation:
NEW QUESTION 136
Refer to the exhibit.
An engineer configured multicast routing on client's network. What is the effect of this multicast implementation?
- A. R1 floods information about R2 throughout the multicast domain.
- B. R2 is unable to share information because the ip pirn autorp listener command is missing.
- C. R2 floods information about R1 throughout the multicast domain.
- D. R2 is elected as the RP for this domain.
Answer: B
NEW QUESTION 137
Refer to the exhibit.
A network engineer Is implementing OSPF multiare
a. Which command on interface G0/1 resolves adjacency Issues in the new area?
- A. Ip ospf network polnt-to-multlpoint
- B. Ip ospf network point-to-point
- C. Ip ospf network non-broadcast
- D. Ip ospf network broadcast
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/xe-16/iro-xe-16-book/iro-multi-area-adj-xe.html
NEW QUESTION 138
A network engineer has configured TE tunnels in the MPLS provider core. Which two steps ensure traffic traverse? (Choose two.)
- A. A tunnel weight is configured in SPF database the same way as a native link.
- B. ECMP between tunnels allows RSVP to function correctly.
- C. Static routes is the only option for directing traffic into a tunnel.
- D. Forwarding adjacency features allows a tunnel to be installed in the IGP table as a link.
- E. The IGP metric of a tunnel is configured to prefer a certain path
Answer: D,E
NEW QUESTION 139
What do Ansible and SaltStack have in common?
- A. They both have agents running on the client machine.
- B. They both use DSL configuration language.
- C. They both use YAML configuration language.
- D. They both can be designed with more than one master server.
Answer: C
Explanation:
Section: Automation and Assurance
Explanation/Reference: https://www.edureka.co/blog/chef-vs-puppet-vs-ansible-vs-saltstack/
NEW QUESTION 140
Refer to the exhibit:
A network administrator wants to enhance the security for SNMP for this configuration.
Which action can the network administrator implement?
- A. Re-configure to use SNMPv2 with MD5 authentication
- B. Re-configure to use SNMPv3.
- C. Add a community string to the existing entry
- D. Maintain the configuration but switch to an encrypted password for device access through SSH
Answer: B
NEW QUESTION 141
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right
Answer:
Explanation:
Explanation
Path Computation Element (PCE)
Represents a software module (which can be a component or application) that enables the router to compute paths applying a set of constraints between any pair of nodes within the router's TE topology database. PCEs are discovered through IGP.
Path Computation Client (PCC)
Represents a software module running on a router that is capable of sending and receiving path computation requests and responses to and from PCEs. The PCC is typically an LSR (Label Switching Router).
https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r5-3/mpls/configuration/guide/b-mpls-cg53x-crs
NEW QUESTION 142
Which characteristic describes prefix segment identifier?
- A. it is locally unique.
- B. It Is globally unique.
- C. it contains the interface address of the device per each link.
- D. It contains a router to a neighbor.
Answer: B
NEW QUESTION 143
Refer to the exhibit:
Assume all other configurations are correct and the network is otherwise operating normally. Which conclusion can you draw about the neighbor relationship between routers R1 and R2?
- A. The neighbor relationship is down because R1 believes R2 is in AS 65012.
- B. The neighbor relationship will be up only if the two devices have activated the correct neighbor relationships under the IPv4 address family
- C. The neighbor relationship is up
- D. The neighbor relationship is down because the loco I-as value for R2 is missing in the R1 neighbor statement
Answer: A
NEW QUESTION 144
Whtch two routing protocols support Cisco MPLS TE tunnels? (Choose two.)
- A. IS-IS
- B. OSPF
- C. EIGRP
- D. RIP
- E. BGP
Answer: A,B
NEW QUESTION 145
......
Cisco 350-501 Pre-Exam Practice Tests | PracticeTorrent: https://www.practicetorrent.com/350-501-practice-exam-torrent.html
350-501 practice test questions, answers, explanations: https://drive.google.com/open?id=1wiRM2tNiK_od7cuUHnxHConiy6JkymWW