SAP C_SACS_2308 Exam Prep Guide: Prep guide for the C_SACS_2308 Exam
2024 New Preparation Guide of SAP C_SACS_2308 Exam
NEW QUESTION # 28
Which of the following are required to configure a section in a story? Note: There are 2 correct answers to this question.
- A. Widget
- B. Dimension
- C. ptimized Design Experience
- D. Classic Design Experience
Answer: A,B
NEW QUESTION # 29
What is a unique quality of viewing stories on a mobile device?
- A. Stories rotate their orientation as you rotate the device.
- B. Stories render only in portrait mode for tablets.
- C. Stories render only in landscape mode for phones.
- D. Stories do not rotate their orientation.
Answer: D
Explanation:
According to the SAP Help Portal1, stories can be viewed only in portrait mode for phones and landscape mode for tablets; the stories do not rotate their orientation. This is a unique quality of viewing stories on a mobile device, as opposed to viewing them on a computer browser, where the stories can be rotated and resized according to the screen dimensions. Therefore, it is important to design stories for mobile devices using the Responsive page and the Device Preview Bar in SAP Analytics Cloud Story Design.
NEW QUESTION # 30
What are some guidelines does SAP recommend you follow when you create a story? Note: There are 2 correct answers to this question.
- A. Use corporate branding standards.
- B. Have a clear message.
- C. Avoid pie charts.
- D. Use grouping.
Answer: A,B
Explanation:
The correct answers are C. Have a clear message and D. Use corporate branding standards. These are some of the guidelines that SAP recommends you follow when you create a story. According to the course material1, "Your current reporting and dashboard standards will suffice for SAP Analytics Cloud stories. And if you do not have reporting or dashboard standards, this is the perfect time to create them." The course material also suggests that you should "have a clear message and purpose for your story" and "use corporate branding standards to ensure consistency and professionalism"1.
The other options are not mentioned as guidelines in the course material. Option A) Use grouping is a feature that allows you to group data points in a chart or table, but it is not a general design principle. Option B. Avoid pie charts is a common advice for data visualization, but it is not specific to SAP Analytics Cloud stories.
1: Introducing SAP Analytics Cloud Story Design | SAP Training 2
NEW QUESTION # 31
Which Filter options are supported in the Optimized Design Experience? Note: There are 3 correct answers to this question.
- A. Input Control
- B. Advanced
- C. Cascading
- D. Section
- E. Controls
Answer: A,B,C
NEW QUESTION # 32
Which link types can you use to blend data in a story? Note: There are 3 correct answers to this question.
- A. All data
- B. Inner data
- C. Outer data
- D. Intersecting data only
- E. All primary data
Answer: B,C,D
NEW QUESTION # 33
When you create a new story and select a responsive page, which choice are you offered?
- A. Mobile device or Desktop
- B. Model or Dataset
- C. Chart or Table
- D. Optimized or Classic Design Experience
Answer: D
Explanation:
When you create a new story and select a responsive page, you are offered the choice of Optimized or Classic Design Experience. This choice determines the design mode that you will use to create your story. The Optimized Design Experience is the newer and more advanced design option that offers several usability improvements and performance enhancements compared to the Classic Design Experience. However, the Optimized Design Experience also has some limitations and differences, such as the unavailability of some elements that are present in the Classic Design Experience1. Therefore, you should choose the design mode that best suits your needs and preferences. You can also switch between the design modes later, but you may lose some features or formatting in the process2.
Reference:
1: Choosing Between Optimized and Classic Design Modes - SAP Learning 2: Switching Between Optimized and Classic Design Modes - SAP Learning
NEW QUESTION # 34
What can you do in the SAP Analytics Cloud mobile app? Note: There are 2 correct answers to this question.
- A. Create a story
- B. Share Links
- C. Create a dataset
- D. Collaborate with colleagues
Answer: B,D
Explanation:
The SAP Analytics Cloud mobile app allows users to view and interact with stories, collaborate with colleagues using comments and notifications, and share links to stories via email or other apps. Users cannot create stories, datasets, or models using the mobile app. Verified Reference: [SAP Analytics Cloud - Mobile App]
NEW QUESTION # 35
When converting a story to Optimized Design Experience, what happens if the story contains elements that are not yet supported?
- A. You receive a warning that the story will be deleted.
- B. You receive a warning with information about what you must change.
- C. The unsupported elements become placeholders.
- D. The unsupported elements are deleted.
Answer: B
NEW QUESTION # 36
Which calculation type can you use to categorize dimension members?
- A. Measure-based dimension
- B. Difference from
- C. Dimension to measure
- D. Calculated dimension
Answer: A
NEW QUESTION # 37
Which of the following are necessary for Linked Analysis?
- A. Multiple stories
- B. Multiple pages
- C. Multiple data models
- D. Multiple widgets
Answer: D
Explanation:
Linked Analysis is a feature that allows you to link multiple widgets in a story based on the same model. You can use Linked Analysis to do the following:
Filter data in multiple widgets by selecting a data point in one widget. For example, if you select Soft Drinks in a chart, all the other linked widgets will show data for Soft Drinks only.
Drill down or up in multiple widgets by changing the level of detail in one widget. For example, if you drill down from Product Category to Product Name in a table, all the other linked widgets will show data for Product Name as well.
Highlight data in multiple widgets by hovering over a data point in one widget. For example, if you hover over Germany in a geo map, all the other linked widgets will highlight the data for Germany.
To use Linked Analysis, you need to have the following:
Multiple widgets based on the same model. You can link any type of widget, such as charts, tables, geo maps, etc., as long as they are based on the same model.
A common dimension or measure between the widgets. You can link widgets based on any dimension or measure that they share in common.
You do not need to have the following for Linked Analysis:
Multiple stories. You can use Linked Analysis within the same story. You cannot link widgets across different stories.
Multiple data models. You can use Linked Analysis with one model only. You cannot link widgets based on different models.
Multiple pages. You can use Linked Analysis within the same page. You cannot link widgets across different pages.
Therefore, the correct answer is Multiple widgets, as it is the necessary element for Linked Analysis. Verified Reference:: Link Widgets with Linked Analysis
NEW QUESTION # 38
To which of the following can you add a section?
- A. Chart
- B. Table
- C. Digital Boardroom
- D. Canvas page
Answer: D
Explanation:
You can add a section to a canvas page in a story. A section is a container that holds one or more widgets and can be used to group related content or apply filters. A digital boardroom, a table, and a chart are not valid targets for adding a section; they are either different types of presentations or widgets that can be added to a section. Verified Reference: [SAP Analytics Cloud - Sections]
NEW QUESTION # 39
Which image file type does SAP recommend for optimal story performance?
- A. JPEG
- B. SVG
- C. BMP
- D. PNG
Answer: B
NEW QUESTION # 40
How does the SAP Digital Boardroom support engaging with a remote audience? Note: There are 2 correct answers to this question.
- A. Through annotations
- B. Through Data Analyzer
- C. Through screen sharing
- D. Through story editing
Answer: A,C
NEW QUESTION # 41
Which of the following are required to configure a section in a story? Note: There are 2 correct answers to this question.
- A. Widget
- B. Dimension
- C. Optimized Design Experience
- D. Classic Design Experience
Answer: A,B
Explanation:
A section is a way to group and organize widgets in a story based on a dimension. To create a section, you need to have the following:
A dimension that you want to use as the basis for grouping the widgets. You can choose any dimension from any model in the story.
One or more widgets that you want to display in each section. You can add any type of widget, such as charts, tables, geo maps, etc.
You can create sections in both the Classic Design Experience and the Optimized Design Experience, but the process is slightly different. Therefore, the correct answer is dimension and widget, as they are required to configure a section in a story
NEW QUESTION # 42
Which calculation type does the SAP BW live model support?
- A. Aggregation
- B. Date difference
- C. Currency conversion
- D. Dimension to measure
Answer: A
Explanation:
The SAP BW live model is a type of live data connection that allows you to access data from SAP Business Warehouse (BW) systems without importing it into SAP Analytics Cloud. The SAP BW live model supports the following calculation types:
Aggregation: You can use aggregation functions, such as SUM, COUNT, MIN, MAX, etc., to calculate the values of a measure based on a dimension or a filter.
Currency conversion: You can use currency conversion to convert the values of a measure from one currency to another based on predefined exchange rates.
Unit conversion: You can use unit conversion to convert the values of a measure from one unit of measurement to another based on predefined conversion factors.
The SAP BW live model does not support the following calculation types:
Dimension to measure: You cannot convert a dimension to a measure in a SAP BW live model.
Date difference: You cannot calculate the difference between two dates in a SAP BW live model.
Story calculation: You cannot create story calculations in a SAP BW live model.
Therefore, the correct answer is Aggregation, as it is the calculation type that the SAP BW live model supports. Verified Reference:: Create Calculations in Models: SAP BW Live Data Connection
NEW QUESTION # 43
For which of the following tasks can you use an input control? Note: There are 2 correct answers to this question.
- A. Define a prompt
- B. Filter dimension or measure
- C. Explore data relationships
- D. Select dimension or measure
Answer: B,D
NEW QUESTION # 44
Which of the following can you use to change the formatting of a table in the Styling panel? Note: There are 2 correct answers to this question.
- A. In-Cell Charts
- B. Thresholds
- C. Styling rules
- D. Table template
Answer: C
NEW QUESTION # 45
What language does the Custom Expression Editor use?
- A. Structured Query Language
- B. JavaScript
- C. Hypertext Markup Language
- D. Wrangling Expression Language
Answer: D
Explanation:
The Custom Expression Editor is a tool that allows you to create complex calculations using a syntax called Wrangling Expression Language (WEL). WEL is a domain-specific language that is designed for data manipulation and analysis. WEL supports various operators, functions, and constants that you can use to create custom expressions. You can access the Custom Expression Editor from various places in SAP Analytics Cloud, such as models, stories, datasets, etc. Therefore, the correct answer is Wrangling Expression Language, as it is the language that the Custom Expression Editor uses. Verified Reference:: Create Custom Expressions with the Custom Expression Editor
NEW QUESTION # 46
What are the presentation types for the Digital Boardroom? Note: There are 2 correct answers to this question.
- A. Dashboard
- B. Canvas
- C. Custom
- D. Agenda
Answer: A,D
Explanation:
The presentation types for the Digital Boardroom are dashboard and agend a. Dashboard allows users to create a custom layout of widgets and pages on a large screen, such as a wall-mounted monitor or a projector. Agenda allows users to create a structured sequence of pages and topics that can be navigated using a touch screen, such as a tablet or a laptop. Custom and canvas are not presentation types for the Digital Boardroom; they are options that can be used to design dashboard layouts or story pages. Verified Reference: [SAP Analytics Cloud - Digital Boardroom]
NEW QUESTION # 47
What are benefits of using the Optimized Design Experience?Note: There are 2 correct answers to this question.
- A. Ghost loading indicators
- B. Support for older versions of SAP HANA and SAP BW
- C. Navigation of small hierarchies
- D. Improved tooltip interactions
Answer: A,D
Explanation:
The Optimized Design Experience is a new user interface for SAP Analytics Cloud that simplifies and enhances the story design process. The Optimized Design Experience offers some benefits over the Classic Design Experience, such as:
Improved tooltip interactions: You can hover over any data point in a chart to see a tooltip with more information. You can also click on the tooltip to access more actions, such as filtering, drilling, commenting, etc.
Ghost loading indicators: You can see a ghost image of the elements on a page while they are loading. This gives you a preview of the layout and size of the elements before they are fully rendered.
Data Analyzer: You can use Data Analyzer to quickly create ad hoc analysis based on models or datasets. You can also save your analysis as stories or pin them to your home page.
Point of Interest: You can use Point of Interest to highlight a specific data point or area in a chart. You can also add annotations, comments, or links to the Point of Interest.
Time Series chart: You can use Time Series chart to create interactive and animated charts that show how data changes over time. You can also customize the appearance and behavior of the Time Series chart.
Therefore, the correct answer is Improved tooltip interactions and Ghost loading indicators, as they are the benefits of using the Optimized Design Experience. Verified Reference:: Optimized Design Experience Overview
NEW QUESTION # 48
What does the model setting Optimize Story Building Performance do in a story?
- A. It automatically turns on parallel processing of SAP BW queries.
- B. It forces the story to be designed in the Optimized Design Experience.
- C. It prevents the automatic refresh of data during story design.
- D. It disables the Classic Design Experience,
Answer: C
Explanation:
The model setting Optimize Story Building Performance prevents the automatic refresh of data during story design. This means that users can design stories without waiting for the data to load every time they make a change. Users can manually refresh the data when they want to see the updated results. The model setting does not affect the design experience, the parallel processing, or the story editing. Verified Reference: [SAP Analytics Cloud - Optimize Story Building Performance]
NEW QUESTION # 49
Which dataset types does SAP Analytics Cloud support?Note: There are 2 correct answers to this question.
- A. Public
- B. Embedded
- C. Import
- D. Live
Answer: C,D
NEW QUESTION # 50
In a story, to which of the following is chart scaling applied? Note: There are 2 correct answers to this question.
- A. All pages
- B. Specific measure
- C. All measures
- D. Specific page
Answer: B,D
Explanation:
Chart scaling is a feature that ensures that you have a meaningful display of values across multiple charts in a story. By default, charts are not scaled, which can lead to incorrect data analysis, particularly if users are not paying attention to the actual values displayed in the chart1.
Chart scaling is applied to the following:
Specific page: Chart scaling is applied to all of the charts on a page, but the scaling may be different for the same measure on different pages, because the scaling factor is calculated separately for each page1.
Specific measure: Chart scaling is applied to a specific measure in a chart, and it affects all the charts that contain that measure on the same page. You can exclude charts from the scaling by selecting the chart and choosing Exclude from Scaling in the context menu1.
Chart scaling is not applied to the following:
All measures: Chart scaling is not applied to all the measures in a story, only to the ones that are selected for scaling. You can select which measures to scale by choosing Scale Measures in the context menu of any chart on a page1.
All pages: Chart scaling is not applied to all the pages in a story, only to the ones that have scaling enabled. You can enable or disable scaling for a page by choosing Enable Scaling or Disable Scaling in the context menu of any chart on a page1.
Reference:
1: Chart Scaling - SAP Learning
NEW QUESTION # 51
......
Latest Questions C_SACS_2308 Guide to Prepare Free Practice Tests: https://www.practicetorrent.com/C_SACS_2308-practice-exam-torrent.html
C_SACS_2308 Practice Exam - 62 Unique Questions: https://drive.google.com/open?id=1SQQpXlgfX2yURXWZxiOHo4Rh6pPrDzHR