[Jan 18, 2024] Latest E-S4HCON2022 PDF Dumps & Real Tests Free Updated Today
E-S4HCON2022 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
SAP E_S4HCON2022 exam covers a variety of topics related to SAP S/4HANA Conversion and SAP System Upgrade. These include project planning, technical configuration, system administration, data migration, system testing, and post-conversion activities. Candidates will be tested on their ability to use SAP tools and technologies effectively, as well as their knowledge of best practices for SAP system upgrades and conversions. E-S4HCON2022 exam is designed to be rigorous and challenging, and requires extensive preparation and study to achieve success.
NEW QUESTION # 28
You performed a custom code check for an SAP S/4HANA conversion. In which transactions can you review the results?
There are 2 correct answers to this question.
Response:
- A. SYCM (Simplification Database Content)
- B. SE80 (Object Navigator)
- C. SAT (Runtime Analysis)
- D. ATC (ABAP Test Cockpit)
Answer: B,D
NEW QUESTION # 29
You are performing an SAP S/4HANA conversion with the migration repetition option. After which phase does SUM stop to enable a test cycle?
- A. EU_CLONE_MIG_SOT_RUN
- B. EU_CLONE_MIG_DT_CREATE
- C. EU_IMPORT_ALL
- D. EU_CLONE_MIG_DT_RUN
Answer: D
NEW QUESTION # 30
Which step can be optimized when you provide the MIGRATE_DT_DUR.XML file to SUM?
- A. Downtime migration
- B. Silent data migration (SDM)
- C. Downtime conversion
- D. Shadow on target creation
Answer: A
NEW QUESTION # 31
In which part of an upgrade does SUM allow you to generate ABAP loads (SGEN)?
There are 2 correct answers to this question.
- A. During uptime
- B. Post-downtime
- C. During SPDD
- D. During downtime
Answer: A,B
NEW QUESTION # 32
What can you achieve by setting the SUM parameter "migration_only" to 1 in parameter file SAPup_add.par?
Please choose the correct answer.
Response:
- A. An SAP S/4HANA conversion is performed, without adapting the customer data.
- B. A migration of the SAP system to a new hardware is performed, without performing an SAP S/4HANA conversion.
- C. A change of the database type is performed, without changing the software components.
- D. An upgrade of the software components is performed, without changing the database type.
Answer: C
NEW QUESTION # 33
Which circumstances will allow SUM to run without the creation of a shadow system?
Please choose the correct answer.
Response:
- A. Using the main configuration option "Single System" when installing an Add-On
- B. Using the main configuration option "Standard" when applying SAP Support Packages
- C. Using the database migration option (DMO) for SUM
- D. Using the main configuration option "Single System" in case of an upgrade.
Answer: A
NEW QUESTION # 34
You are performing an SAP S/4HANA conversion. Which phases are executed during SUM technical downtime? Note: There are 2 correct answers to this question
- A. TABIM_SHADOW_*
- B. TABIMJJPG
- C. PARDIST_SHD
- D. PARMVNT_UPG
Answer: B
NEW QUESTION # 35
You downloaded content from the SAP note 1000009 ("ASU Toolbox 2008"). Which transaction needs to be executed to use that content in the ASU Toolbox?
Please choose the correct answer.
Response:
- A. /ASU/SSM (ASU Simple Schedule Manager)
- B. /ASU/UPGRADE (Start ASU Toolbox in Upgrade Mode)
- C. /ASU/START (Start ASU Toolbox)
- D. /ASU/SHOW_NOTE (Show SAP Note via Web-Browser)
Answer: C
NEW QUESTION # 36
You are executing a standard SUM procedure to update an SAP system using main configuration mode "Standard". When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:
- A. At the end of the downtime
- B. Early in the downtime
- C. As part of the cleanup process
- D. Before the downtime starts
Answer: D
NEW QUESTION # 37
What is the main purpose of performing benchmark runs for an SAP S/4HANA conversion?
- A. To optimize the migration
- B. To optimize the main import
- C. To optimize the conversion
- D. To optimize the activation
Answer: A
NEW QUESTION # 38
You are performing an upgrade of an SAP ECC development system with SUM. What is the earliest point when the upgrade is considered complete and you can allow all dialog users to log on to the system?
Please choose the correct answer.
Response:
- A. After the SUM roadmap step "Execution" is finished and before "Postprocessing"
- B. After the SUM roadmap step "Postprocessing" and post procedure steps are finished
- C. During the SUM roadmap step "Postprocessing", after the post procedure steps are complete
- D. During the SUM roadmap step "Postprocessing", in parallel with post procedure steps
Answer: C
NEW QUESTION # 39
You are performing an SAP S/4HANA conversion for your production system. This conversion requires that certain business functions are switched on.
Following SAP recommendations, how will you achieve this?
There are 2 correct answers to this question.
Response:
- A. Activate the required business functions manually in the production system.
- B. Import a transport request from the development system that contains the recording of the activation.
- C. During conversion, SUM delivers some business functions already activated.
- D. Specify the business functions that need to be switched on during the prepare part of SUM.
Answer: B,C
NEW QUESTION # 40
What is the minimum SAP_BASIS release of an SAP ECC system that can be converted to an SAP S/4HANA Server?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 41
Which of the following are valid options to check the progress of an inplace SUM DMO run? Note There are 2 correct answers to this question
- A. Check the Charts Control Center in the SUM Ul
- B. Check the log files written in the SUM directory subdirectory abap. subdirectory log
- C. Check logs for jobs starting with RSUPG_SGEN in the SAP system.
- D. Check the dump size of the database export on disk.
Answer: B,D
NEW QUESTION # 42
What are the benefits of using the Benchmarking option of the DMO for SUM?
There are 2 correct answers to this question.
Response:
- A. You can record the modification adjustment during migration and use the transports in the next runs.
- B. You can obtain migration duration files that can be used to optimize the next runs from a previous benchmark run.
- C. You can verify that the content of the download directory matches the stack.XML file.
- D. You can find the optimal number of parallel R31oad processes by monitoring host performance.
Answer: A,D
NEW QUESTION # 43
What are the benefits of using the benchmarking option of the DMO for SUM? Note There are 2 correct answers to this question
- A. You can obtain migration duration tiles from a previous benchmark run that can be used to optimize the next runs
- B. You can record the modification adjustment during migration and use the transports in the next runs.
- C. You can find the optimal number of parallel H3load processes by monitoring host performance
- D. You can verify that the content of the download directory matches the stack XML file.
Answer: A,C
NEW QUESTION # 44
During an SAP S/4HANA conversion with DMO, which of the following actions take place during the business downtime of the SUM procedure?
There are 3 correct answers to this question.
Response:
- A. Execution of eCATTs for business validation tests
- B. Execution of SPDD modification adjustment
- C. Creation of the table structures in the new SAP HANA database
- D. Execution of XPRAs and AIMs
- E. Execution of SPAU modification adjustment
Answer: A,D,E
NEW QUESTION # 45
During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:
- A. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp
- B. In the corresponding R3trans log files of this phase
- C. In the job log for the corresponding job in SM37 (Job Overview)
- D. In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log
Answer: C,D
NEW QUESTION # 46
When using the DMO of SUM, which files can be handled by SUM in the download directory?
There are 2 correct answers to this question.
Response:
- A. Stack XML file calculated by the Maintenance Planner
- B. MIGRATE J5T_DUR_XML file from a previous run
- C. Breakpoint configuration file SAPUPPHAS.BRK
- D. Parameter file SAPup_add.par
Answer: A,B
NEW QUESTION # 47
During the configuration of the DMO for SUM, how does the tool behave if option "Do not compare table contents" is selected regarding table comparison?
Please choose the correct answer.
Response:
- A. It performs a comparison on selected tables using check sum.
- B. It performs a comparison of all tables using check sum.
- C. It performs a comparison on all tables using row counts.
- D. It does NOT perform any table comparison.
Answer: C
NEW QUESTION # 48
......
2024 Valid E-S4HCON2022 test answers & SAP Exam PDF: https://www.practicetorrent.com/E-S4HCON2022-practice-exam-torrent.html
Pass SAP E-S4HCON2022 Exam With Practice Test Questions Dumps Bundle: https://drive.google.com/open?id=10lnjSjENqZ2kTyDygYbDaa3CPYfiEzU1